What ports are used by Exacqvision?
Port is the port used by the exacqVision Server. By default, the port is 22609. By default, the port is 22609. PassthroughEnabled allows a user to log in without credentials.
How do I connect to the Exacqvision server?
Enter the port used by the exacqVision Server. By default, the port is 22609. 3. If you want to have an automatic login for web clients, select Passthrough. If you do not select this option, the system will require the users to enter a username and password each time they log in. 4.
How do I change the port number of the Exacqvision web service?
Save the file and restart the exacqVision Web Service to begin using the new port number. NOTE:If the exacqVision Web Service is reinstalled or upgraded, the port number could be reset to the default (80). After reinstalling or upgrading the Web Service, open the lighttpd.conf file and ensure that the port number is configured as desired.
How do I set up an exacq web service?
In the Add Web Services window, in the Friendly Name field enter a name that easily identifies the server. In the Address field, enter the server's hostname or IP address. In the Port field, enter the port number for the exacq web service. The default port number is 80.
How do I log into exacqVision?
To verify the configuration, open a web browser on the exacqVision Web Service computer, enter address 127.0. 0.1, log in (if necessary), and confirm that video can be viewed from a connected camera. The web browser/thin client provides many of the same features available in exacqVision Client.
How do I use exacqVision client?
0:154:35exacqVision Client Settings - YouTubeYouTubeStart of suggested clipEnd of suggested clipTo open the exact mission client settings. Page select the configuration icon in the menu bar thenMoreTo open the exact mission client settings. Page select the configuration icon in the menu bar then from the configuration menu select client the exactvision client settings page will appear.
Where does exacqVision save?
It seems the new default location is Documents–> Exacqvision Files. Is there a way to change this file location, as well as a way to display where the file is being saved to? it's no longer intuitive for end users to find where their saved clip went, and adds additional steps if trying to save to a shared drive.
What is the default admin password on an exacqVision server?
admin256Note: The default username is admin and the default password is admin256. To prevent unauthorized access or modifications to the system, change the default username and password.
What is exacqVision client?
The exacqVision VMS software records surveillance video from thousands of IP camera models and displays on a free Windows, Linux or OSX client software, web browser or mobile device.
How do I set up exacqVision?
1:282:26System Setup - exacqVision Online Training Series - YouTubeYouTubeStart of suggested clipEnd of suggested clipSelect enable override to force the IP camera to synchronize to the time server entered otherwise.MoreSelect enable override to force the IP camera to synchronize to the time server entered otherwise. The camera will synchronized with the exact vision server.
How do I update exacqVision client?
ProcedureClick Add Systems.Select the Import/Export tab.Check the Enable check box.Select Synchronize with exacqVision Enterprise Manager.Enter the URL of the exacqVision Enterprise Manager system.Select Use credentials entered below.Enter the exacqVision Enterprise Manager User Name.More items...
How do I restart exacqVision?
Click Reboot on the status page to restart the camera. d. After the camera has restarted, return to the Settings/General page and verify the status.
How do I install exacqVision client?
Install ExacqVision Client on a Macintosh ComputerWhen the file is downloaded, navigate to where the file was downloaded (usually the Downloads folder) and double click the exacqVisionClient_NNN_x64. ... The installation folder will appear on the desktop and open a folder to install the application.More items...•
How do I install exacqVision client?
Install ExacqVision Client on a Macintosh ComputerWhen the file is downloaded, navigate to where the file was downloaded (usually the Downloads folder) and double click the exacqVisionClient_NNN_x64. ... The installation folder will appear on the desktop and open a folder to install the application.More items...•
How do I export a video from exacqVision?
Ctrl-click (or right click) again and select Mark Export Stop. Finally, ctrl-click (or right click) and select Export Video. Select the folder you wish to export to. By default the folder is exacqVision Files.
How do I export my camera list from exacqVision?
2:495:41Auto Export, exacqVision - YouTubeYouTubeStart of suggested clipEnd of suggested clipPage select the event source and select auto export as your action type and your profile as theMorePage select the event source and select auto export as your action type and your profile as the target.
How do I restart exacqVision?
Click Reboot on the status page to restart the camera. d. After the camera has restarted, return to the Settings/General page and verify the status.
What is ExacqVision web service?
The exacqVision Web Service uses a significant amount of computer resources to transcode video. Required resources increase in proportion to the number of simultaneous connections and the data rate of incoming video. Hardware upgrades might be necessary to support heavy Web Service workloads.
How does ExacqVision work?
The exacqVision Web Service allows you to use a web browser to view live video, search and play back recorded video , and control pan/tilt/zoom functions on cameras connected to exacqVision servers . The Web Service connects to the exacqVision server as a client and transcodes captured video into JPEG files. The service then sends the JPEGs to the browser as fast as requested by the browser, or as fast as possible if the requested rate is too high for the connection.
How to configure web service?
To configure web service, you must open the Web Service browser on the localhost and enter the system hostname as the address. Click the Web Service Configuration link at the bottom-right corner of the page.
What is a PTZ control window?
The PTZ control window allows you to select presets, control PTZ, zoom in and out, and set the PTZ speed.
How to view multiple cameras on a server?
2. Size:Click plus
How to install ExacqVision?
To install exacqVision Web Service, download it from www.exacq.com/support/downloads.html. Run the setup file while logged in as the administrator of the server. Follow the simple onscreen instructions to install Web Service.
What is the view button on a camera?
When you click the Views button, a list of camera views that are configured on the connected servers is displayed. Click a view name to open the cameras configured in the camera view.
What is ExacqVision web service?
The exacqVision web service uses a significant amount of computer resources to transcode video. Required resources increase in proportion to the number of simultaneous connections and the data rate of incoming video. Hardware upgrades are necessary to support heavy web service workloads.
What is server connection pane?
The Server Connections pane displays a list of the connected and discovered servers. In the Server Connections pane, you can manually define the exacqVision servers that users can connect to, or set the system to automatically find the servers for you.
Can you use a relay connection on Exacq?
You can now use a relay connection to access web services by using a public secure URL. You can enable or disable the relay URL on the Web Service Configuration page. When you access the web service from the Exacq Mobile app, an internal network address takes priority but the app automatically selects the best method of communication. For more information, see Editing the basic service configuration.
Can you use Exacq Mobile to configure ExacqVision?
You can use the Exacq Mobile app to view live video, search for recorded video, and perform other security relatedtasks on exacqVision severs. You cannot use Exacq Mobile to configure exacqVision systems.
Can you use video push on Exacq?
You can use Video Push to receive and send views to and from exacqVision client users and Exacq Mobile clients.You can also receive or send any view with an audio device playing. For more information on audio devices, see
What port does Remote Utilities use?
When you enable Internet-ID connection type, the program connects through our company-hosted server by default. Remote Utilities uses a single outbound TCP port 5655 to communicate with our public server. If this port is blocked, the program automatically attempts to use outbound TCP port 443.
What to do if port 5650 is not used?
If port 5650 cannot be used for some reason, you can change it to a different value in the Host settings. If you changed the port on the Host side, remember to also update the port in the corresponding connection properties on the Viewer side.
What is direct connection?
Direct connection. A direct connection is possible when the Host is in direct visibility to the Viewer, i.e. the Host can be addressed by its IP address or hostname (DNS name). This connection type does not require any intermediary (relay) servers in-between Viewer and Host and is by definition the fastest way to access a remote Host.
What is a RU server?
Remote Utilities Server (RU Server) is self-hosted server software that you can install on your premises. You can set up RU Server to perform the following roles:
What is a viewer?
Viewer is a single "command center" used by a support technician/admin. The Viewer is where you keep your address book, start remote sessions and manage your licenses.
Can you replace a public server with a self hosted RU server?
With a bit of configuration you can replace our public server with a self-hosted RU Server by which to route your Internet-ID connections. This makes your remote support solution completely autonomous and no longer dependent on our company infrastructure.
What is the port number of ExacqVision?
After reinstalling or upgrading the Web Service, open the lighttpd.conf file and ensure that the port number is configured as desired.
How to allow clients to access ExacqVision?
If you want to allow clients from outside your local area network access your exacqVision Web Service, you must change your router settings to forward port 80 to the Web Service’s IP address. See your router user manual or go to www.portforward.com/routers.htm for instructions.
What is ExacqVision web service?
The exacqVision Web Service allows you to use a web browser to view live video, search and play back recorded video, and control pan/tilt/zoom functions on cameras connected to exacqVision servers. The Web Service connects to the exacqVision server as a client and transcodes captured video into JPEG files. The service then sends the JPEGs to the browser as fast as requested by the browser, or as fast as possible if the requested rate is too high for the connection.
What is LightTPD in ExacqVision?
LightTPD is the default web server provided with exacqVision. For greater performance with five or more simultaneous exacqVision Web Service connections, it is recommended that you switch to Apache on a dedicated web server. To do this, complete the following steps:
How to start ExacqVision?
To start the Web Service, go to Start, Programs, exacqVision Web Service, and then Start exacqVision Web Service. It is recommended that you configure the service to start automatically in case of a power outage and unexpected system restart.
What is power user?
Power User: Access to all features except for adding or deleting users
How to view camera in JavaScript?
To view a camera, simply drag it into the desired panel. Double-click a camera name to fill all the current layout panels,
