Remote Access Point functionality is only supported on the AP225W, AP327X, and AP420. You can use the WatchGuard Firebox as an IPSec VPN endpoint for the remote AP. A remote AP requires a virtual IP address to create the VPN tunnel. When you use a remote AP with the Firebox, you must use the Mobile VPN with IKEv2 solution on a Firebox to provide a virtual IP address for the remote AP. Configure a Firebox VPN for a Remote Access Point
Full Answer
How do I enable support access in WatchGuard?
To enable support access: Select Tools > Support Access. The WatchGuard Support Access dialog box appears. Type a user name and passphrase for a user with administrative privileges. Click OK. The Support Access dialog box appears. Select the Enable Support Access check box.
How do I add an external IP address to WatchGuard firebox?
Double-click the WatchGuard Web UI policy to edit it. Select the Policy tab. In the From section, click Add. To add the IP address of the external computer that connects to the Firebox, from the Member type drop-down list, select Host IP, and click OK.
Can the firebox Send Diagnostic log messages to WatchGuard cloud?
In Fireware v12.5.4 and higher, the Enable Support Access option also enables the Firebox to send diagnostic log messages to WatchGuard Cloud. Firebox diagnostic log messages are not visible in WatchGuard Cloud.
See more
How do I access my WatchGuard firewall remotely?
Double-click the WatchGuard Web UI policy to edit it. Select the Policy tab. In the From section, click Add. To add the IP address of the external computer that connects to the Firebox, from the Member type drop-down list, select Host IP, and click OK.
What is WatchGuard access portal?
The Access Portal is a clientless VPN solution that provides secure remote access to common web applications that use HTML, HTML5, and JavaScript technologies. With the Access Portal, you do not need to install a software or hardware client.
How do I access WatchGuard console?
To see the available support access command options, at the console connection prompt:Type /opt/watchguard/dimension/bin/wg_support_access.sh -h.Press Enter on your keyboard. The available support access command options appear.
How do I connect to a remote access point?
0:112:26Remote access point set-up demo - YouTubeYouTubeStart of suggested clipEnd of suggested clipFirst find your plastic desktop mount and snap it onto your wrap. So it can stand on its own like.MoreFirst find your plastic desktop mount and snap it onto your wrap. So it can stand on its own like. This next find an ethernet port on your wrap labeled e0. Take one end of your Ethernet cable.
What is WatchGuard AuthPoint?
AuthPoint is WatchGuard's multi-factor authentication (MFA) service. With AuthPoint, you can require users to authenticate with the AuthPoint mobile app or a hardware token when they log in to a protected resource, such as a computer, VPN, or a cloud service or application.
How do I enable SSH on WatchGuard?
To add an SSH host to the Access Portal, from Fireware Web UI:Click Add and select Host Shell Access (SSH). ... In the Name text box, type a name for the SSH connection.In the Description text box, type a description of the SSH connection.To select a custom icon for the application, select Custom Icon > Choose File.More items...
How do I log into WatchGuard System Manager?
Connect to your Management Server with WSMFrom the Management Server drop-down list, select a server by its host name or IP address. ... Type your user name for your user account on the Management Server.Type the passphrase for your user account. ... If necessary, change the Timeout value. ... Click Login.
How do you use WatchGuard?
Connect to a Device with WatchGuard System ManagerStart WatchGuard System Manager.Click . Or, select File > Connect to Device. Or, right-click anywhere on the WSM Device Status tab and select Connect To > Device. The Connect to Firebox dialog box appears.
How do I access Firebox System Manager?
You can use Firebox System Manager (FSM) to view the status of your connected Firebox....Start Firebox System ManagerFrom WatchGuard System Manager, select the Device Status tab.Select the Firebox to examine with Firebox System Manager.Click . Or, select Tools > Firebox System Manager. Firebox System Manager appears.
How can I access my router remotely from anywhere?
To connect to your personal router remotely, go to your web browser on your phone. Type in your router's IP address. It's the same IP address you used when you were setting up the remote access. A log-in page will be displayed.
How do I remotely access my router from outside network?
All you need to do is type the router IP or default gateway address in the web browser. Next, enter your username and password. Now, once you are in the router's web portal, look for the Remote Management option. Some routers called it Remote Access and it's usually found under Advanced Settings.
What is the differences between remote access and site to site VPN?
A remote access VPN connects remote users from any location to a corporate network. A site-to-site VPN, meanwhile, connects individual networks to each other.
How do you update WatchGuard dimensions?
Select Manage Services > System Settings. The System Settings > Status page opens. Click Upgrade and click Browse to select the primary Dimension upgrade file: watchguard-dimension_1_2_amd64.
How do I factory reset my WatchGuard M200?
To reset a Firebox M200 or M300 to factory-default settings:Power on the Firebox.Wait until the Arm indicator ( ... Press and hold the Reset button on the front of the device. ... Continue to hold the Reset button while the Arm indicator is red or is not lit.More items...
How do I set dimensions on WatchGuard?
To get started with WatchGuard Dimension, you must complete these steps:Step 1 — Install Dimension. ... Step 2 — Run the Dimension Setup Wizard. ... Step 3 — Add Fireboxes to Dimension for Management. ... Step 4 — Configure Devices to Send Log Messages to Dimension. ... Step 5 — Enable Logging in Policies.More items...
Security Breaches on the Rise
When one of your users leaves the safety of your perimeter you lose a significant amount of visibility and control over their security. The problem becomes worse when they connect from locations with limited protections, open Wi-Fi networks, shoulder surfers, and ever-present distraction.
Remote Work Security Solutions
Protect your employees anywhere with advanced endpoint security, multi-factor authentication, VPNs, Cloud-hosted firewalls, and more.
What is the Taoglas Crowd Insights solution?
Together with the Taoglas CROWD Insights solution, we can help you monitor and manage crowds via the WatchGuard Wi-Fi Cloud infrastructure. Focused on social distancing compliance, it allows companies to monitor, predict, and provide alerts to you when capacity limits are exceeded.
What are the challenges of mobile workforce?
One of the challenges of enabling a mobile workforce is that the chances of being the subject of cyber attacks can increase significantly. Without the benefit of your core network protections, a user on the go could become infected without your knowledge, and even introduce the infection to your broader environment when they reconnect ...
Does Watchguard have a VPN?
Cloud-hosted firewalls can help to load-balance VPN traffic destined for your HQ and scale to accommodate the connections your company requires. To help you get through the surge of VPN traffic, WatchGuard is offering FireboxV licenses free for 30 days. Three mobile VPN options are supported and available to accommodate your specific network security needs. For additional information view the FireboxV and COVID-19 licensing FAQ.
