Remote-access Guide

remote access guide

by Mrs. Aryanna Wiegand Published 2 years ago Updated 1 year ago

What are remote access services?

Remote Access Services provide secure, cost-effective ways for mobile workers, telecommuters, and non-government customers on external networks to access the Shared Provincial Access Network for British Columbia (SPAN/BC).

What are the different types of remote access protocols?

The primary remote access protocols in use today are the Serial Line Internet Protocol (SLIP), Point-to-Point Protocol (PPP), Point-to-Point Protocol over Ethernet (PPPoE), Point-to-Point Tunneling Protocol (PPTP), Remote Access Services (RAS), and Remote Desktop Protocol (RDP).

How do I set up remote access with ConnectWise Control?

Log into your ConnectWise Control site 2. Build a new access agent 3. Install the access agent on a machine 4. Connect to your session 5. Conduct your remote access session This guide will provide an overview of remote access with ConnectWise Control®. What is a remote access session?

What are the requirements for a remote access server?

Server requirements The Remote Access server must be a domain member. If the Remote Access server is located behind an edge firewall or NAT device, the device must be configured to allow traffic to and from the Remote Access server.

How to install Remote Access as a LAN router?

What is always on VPN?

What is web application proxy?

Can you use remote access in Azure?

About this website


What are the remote access methods?

The primary remote access protocols in use today are the Serial Line Internet Protocol (SLIP), Point-to-Point Protocol (PPP), Point-to-Point Protocol over Ethernet (PPPoE), Point-to-Point Tunneling Protocol (PPTP), Remote Access Services (RAS), and Remote Desktop Protocol (RDP).

How do I set up remote access?

How to allow remote connections on Windows 10 using the Control PanelOpen the Control Panel.Select “System and Security”.Below the “System” section, click “Allow remote access”.Below the “Remote Desktop” section, enable “Allow remote connections to this computer”.Hit “Apply” and then “OK”.

What should be included in a remote access policy?

What Should You Address in a Remote Access Policy?Standardized hardware and software, including firewalls and antivirus/antimalware programs.Data and network encryption standards.Information security and confidentiality.Email usage.Physical and virtual device security.Network connectivity, e.g., VPN access.More items...•

What is a remote access plan?

A well-designed remote access plan provides access to the required corporate data and applications for users when they're off-premises.

How do I remotely connect to another computer?

Access a computer remotelyOn your Android phone or tablet, open the Chrome Remote Desktop app. . ... Tap the computer you want to access from the list. If a computer is dimmed, it's offline or unavailable.You can control the computer in two different modes. To switch between modes, tap the icon in the toolbar.

How can I remotely control another computer?

How Can I Remotely Access Another Computer For Free?the Start Window.Type in and enter remote settings into the Cortana search box.Select Allow Remote PC access to your computer.Click the Remote tab on the System Properties window.Click Allow remote desktop connection Manager to this computer.More items...•

Why is remote access important?

With remote access, employees can safely work from any device, platform, or network at their home office or abroad. Remote desktop functions allow them to remotely access important files and share their screen for meetings and troubleshooting.

What is a VPN policy?

A VPN security policy is a policy that defines. just about everything that anyone would need to know about your VPN. It defines. things like who can use the VPN, what they can use it for, and what it is that. keeps them from using improperly or maliciously.

What security best practices are for connecting to remote systems?

7 Best Practices For Securing Remote Access for EmployeesDevelop a Cybersecurity Policy For Remote Workers. ... Choose a Remote Access Software. ... Use Encryption. ... Implement a Password Management Software. ... Apply Two-factor Authentication. ... Employ the Principle of Least Privilege. ... Create Employee Cybersecurity Training.

What are three examples of remote access locations?

What Is Remote Access?Queens College.Harvard University Extension School.

What is the main purpose of a RAS server?

A remote access server (RAS) is a type of server that provides a suite of services to remotely connected users over a network or the Internet. It operates as a remote gateway or central server that connects remote users with an organization's internal local area network (LAN).

How do I set up remote access on Windows 10?

Windows 10: Allow Access to Use Remote DesktopClick the Start menu from your desktop, and then click Control Panel.Click System and Security once the Control Panel opens.Click Allow remote access, located under the System tab.Click Select Users, located in the Remote Desktop section of the Remote tab.More items...•

How can I remotely access another computer over the internet for free?

10 Best Free Remote Desktop Tools You Should KnowTeamViewer. Available in premium and free versions, TeamViewer is quite an impressive online collaboration tool used for virtual meetings and sharing presentations. ... Splashtop. ... Chrome Remote Desktop. ... Microsoft Remote Desktop. ... TightVNC. ... Mikogo. ... LogMeIn. ... pcAnywhere.More items...

How do I access another computer on the same network?

Before you can access another computer's desktop, you will need to set up the "host" computer to enable a remote desktop connection, then you can connect to it remotely from another computer with the same operating system. You will need the computer name, or local IP address of the computer you are trying to access.

How Prepared Were You for the Shift to Mostly Remote Access?

Quick, where were you when you found out you had to work from home? I remember thinking, “Wow, they just shut down Italy. I have never heard of an entire country being shut down.”

The Remote Access Guide Version 3.0

In our new 3.0 version of the “The Essential Guide to Securing Remote Access” we will walk you through the latest breach techniques and how to protect against them. No matter what size your company is (large or small) at Duo we make security the right thing to do, as well as an easy thing to do with our world-class multi-factor authentication.

Try Duo For Free

With our free 30-day trial and see how easy it is to get started with Duo and secure your workforce, from anywhere and on any device.

What permissions do remote access users need?

Admins who deploy a Remote Access server require local administrator permissions on the server and domain user permissions. In addition, the administrator requires permissions for the GPOs that are used for DirectAccess deployment.

What is DirectAccess client?

DirectAccess client computers are connected to the intranet whenever they are connected to the Internet, regardless of whether the user has signed in to the computer. They can be managed as intranet resources and kept current with Group Policy changes, operating system updates, antimalware updates, and other organizational changes.

What is DirectAccess Remote Client Management?

The DirectAccess Remote Client Management deployment scenario uses DirectAccess to maintain clients over the Internet. This section explains the scenario, including its phases, roles, features, and links to additional resources.

Do DirectAccess clients have to be domain members?

DirectAccess clients must be domain members. Domains that contain clients can belong to the same forest as the Remote Access server, or they can have a two-way trust with the Remote Access server forest or domain.

Do I need domain admin permissions for DirectAccess?

To take advantage of the features that restrict DirectAccess deployment to only mobile computers, Domain Admin permissions are required on the domain controller to create a WMI filter. If the network location server is not located on the Remote Access server, a separate server to run it is required.

Do you need a certificate for remote access?

A certification authority is required on the server if you do not want to use self-signed certificates for IP-HTTPS or the network location server, or if you want to use client certificates for client IPsec authentication.

How to avoid session errors?

To avoid session errors, use a single browser session (one window with multiple tabs) throughout your remote access experience. If the following message presents, it is recommended that you close the browser completely and start over.

Where is the VPN shortcut on my laptop?

If there is no shortcut type in “Big- IP Edge Client” into the search bar (located at the bottom, on the task bar).

Can Citrix be fulfilled by Service Desk?

Requests for Network Drive access in Citrix can be fulfilled by the Service Desk, assuming that the employee use case cannot be met with Remote Access Portal access alone.

How to use PPTP?

To use PPTP, you’ll have to set up a PPP session between the server and the client, usually over the internet. Once the session is established, you’ll create a second dial-up session. This dial-up session will use PPTP to dial through the existing PPP session.

What is PPTP in a network?

PPTP is a remote access protocol, based on PPP, created by Microsoft. It’s used to establish virtual connections across the internet via PPP and TCP/IP, enabling two networks to use the internet as their WAN link while retaining the security benefits of a private network.

What is PPP protocol?

PPP is a remote access protocol that allows you to implement TCP/IP. It establishes a connection via point-to-point links (i.e., dedicated leased lines and dial-up). PPP is used most often for remote connections to LANs and ISPs. PPP utilizes the Link Control Protocol (LCP), which tests the link between client and PPP host ...

What is RDP in Citrix?

Finally, there is the RDP, which is very similar to the Independent Computing Architecture (ICA) protocol used by Citrix products. RDP is utilized to access Windows Terminal Services, which is a close relative of the product line provided by Citrix WinFrame.

What are the disadvantages of PPP?

Unfortunately, one of PPP’s disadvantages is it attracts a high overhead and isn’t compatible with certain older configurations. For technicians, PPP is generally considered easily configurable. Once you connect the router via PPP, it assigns all other TCP/IP parameters for you.

What is remote access protocol?

A remote access protocol is responsible for managing the connection between a remote access server and a remote computer. It’s necessary for desktop sharing and remote access for help desk activities. The primary remote access protocols in use today are the Serial Line Internet Protocol (SLIP), Point-to-Point Protocol (PPP), ...

What is managed services provider?

As a managed services provider (MSP), you likely already work with remote access protocols on a daily basis. But learning how to best explain the various types of remote access protocols and their advantages and disadvantages to customers is critical in helping them understand your decisions—and why they should trust you and your services.

How to connect to a remote desktop?

Use Remote Desktop to connect to the PC you set up: On your local Windows 10 PC: In the search box on the taskbar, type Remote Desktop Connection, and then select Remote Desktop Connection. In Remote Desktop Connection, type the name of the PC you want to connect to (from Step 1), and then select Connect.

How to use Remote Desktop on Windows 10?

Set up the PC you want to connect to so it allows remote connections: Make sure you have Windows 10 Pro. To check, go to Start > Settings > System > About and look for Edition . For info on how to get it, go ...

How to check if Windows 10 Home is remote?

To check, go to Start > Settings > System > About and look for Edition . For info on how to get it, go to Upgrade Windows 10 Home to Windows 10 Pro. When you're ready, select Start > Settings > System > Remote Desktop, and turn on Enable Remote Desktop. Make note of the name of this PC under How to connect to this PC. You'll need this later.

What is secure remote access?

What it means to provide secure remote access has changed considerably in the past few years as a result of new technologies and the pandemic. At its most basic, secure remote access is having location-agnostic connectivity among enterprise users and centralized applications, resources and systems, whether cloud-based or on premises.

Who is responsible for secure remote access?

Although remote access tools, such as VPNs and firewalls, are typically under the purview of network teams, in this new era, cybersecurity teams tend to lead and manage the policies, processes and technologies associated with ensuring secure remote access.

The diminishing power of VPNs

One tactic organizations use to combat the vulnerabilities associated with working remotely -- especially if employees are using consumer-grade systems -- is to reestablish VPN standards. This entails enforcing basic protections, such as strong passwords, multifactor authentication, role-based access and encryption.

Setting secure remote access policies

A hallmark of secure remote access is the underlying policy that safeguards access to and the use of enterprise resources, such as data, databases, systems and networks.

Components of the secure remote access ecosystem

Secure remote access touches just about every aspect of enterprise security. TechTarget has curated a series of guides to help IT and security professionals get up to speed on important technologies and concepts.

Zero trust and secure remote access

Cybersecurity and IT teams realize words like perimeter and trust are quickly becoming outdated as borders dissolve and the base of users that need access to resources expands. No longer are organizations protected by four castle walls, with a firewall moat keeping miscreants out.

SASE and secure remote access

Secure Access Service Edge is an emerging concept that combines network and security functions into a single cloud service, not only to alleviate traffic from being routed through the data center, but also to embrace a remote workforce, IoT adoption and cloud-based application use.

How to install Remote Access as a LAN router?

To install Remote Access as a LAN router, either use the Add Roles and Features Wizard in Server Manager and select the Remote Access server role and the Routing role service; or type the following command at a Windows PowerShell prompt, and then press ENTER. Install-RemoteAccess -VpnType RoutingOnly.

What is always on VPN?

Always On VPN enables remote users to securely access shared resources, intranet Web sites, and applications on an internal network without connecting to a VPN. For more information, see RAS Gateway and Border Gateway Protocol (BGP).

What is web application proxy?

Web Application Proxy provides reverse proxy functionality for web applications inside your corporate network to allow users on any device to access them from outside the corporate network. Web Application Proxy pre-authenticates access to web applications using Active Directory Federation Services (AD FS), and also functions as an AD FS proxy.

Can you use remote access in Azure?

Using Remote Access in Microsoft Azure is not supported. You cannot use Remote Access in an Azure VM to deploy VPN, DirectAccess, or any other Remote Access feature in Windows Server 2016 or earlier versions of Windows Server. For more information, see Microsoft server software support for Microsoft Azure virtual machines.

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9