There are several reasons why the Remote Access Test may fail: 1) Personal Firewall settings on your computer: The personal firewall software on your computer may be set by default to prohibit the port connection.
What is the NetLab remote laboratory?
The NetLab remote laboratory project is being developed as part of the University of South Australia's policy and commitment to innovation and it's support of the development of new technologies.
Why can't I access NetLab+ from another location?
Security policy at your current location: It is possible that local security policy does not allow outbound access using the port (s) chosen by the NETLAB+ administrator. This is the most likely diagnosis if you are able to successfully access the system from another location.
What is a remote access test?
A Remote Access Test is performed during each user login. The purpose of the test is to attempt to establish an outbound TCP connection. This connection is necessary for remote device access, and remote PC access and access to chat functions.
Why does NetLab+ take so long to load?
It is likely that the timeout within NETLAB+ is related to the Java plug-in. The latest version of Java must be installed and properly configured within your web browser. Installing the latest version of Java on your machine does not always ensure that it gets properly configured to work in your browser.
How to login to NETLAB?
Initial Login Your instructor or NETLAB+ Administrator will provide you with the URL or IP address of the NETLAB+ system you will use, along with a username and password. 1. To access the login page, open a web browser and type in the URL or IP address of the NETLAB+ system.
How do you Ctrl Alt Delete in Netlab?
Ctrl-Alt-Delete or Take Screenshot If you need to send a Ctrl-Alt-Del, click on the small down arrow next to your VM.
How do I copy and paste in Netlab?
0:382:17NetLab Special Feature - Copy and Paste - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo ctrl C or you know however you want to copy it. And then once it's copied you want to paste it inMoreSo ctrl C or you know however you want to copy it. And then once it's copied you want to paste it in move the correct interface board on your router in that lab go to your selected router.
How do I assign an IP address to Netlab?
Choose [I] to configure the IP address you will use at your site. This IP address must be compatible with your LAN network address space. At the prompt, enter the IP address in dotted decimal format. Next, enter values for the subnet mask and default gateway.
How do I send Ctrl Alt Delete to a virtual machine?
You can send the keystroke combination in any of the following ways.Select Virtual Machine > Send Ctrl-Alt-Del.If you are using an external PC keyboard, press Ctrl+Alt+Del.On a full-sized Mac keyboard, press Fwd Del+Ctrl+Option. The. ... On a Mac laptop keyboard, press Fn+Ctrl+Option+Delete.
How do you Ctrl Alt Delete without keyboard?
The Ease of Access menu can be opened by pressing Windows Key + U. Press OK if you want to type without a keyboard. The user should press the Del key after seeing the on-screen keyboard.
How do I assign an IP address to a VLAN?
Configuring IP Address for VLANconfigure terminal. Enter global configuration mode.interface vlan vlan-id. Enter interface configuration mode, and enter the VLAN to which the IP information is assigned. ... ip address { ip-address subnet-mask | dhcp } ... exit. ... show interfaces vlan vlan-id. ... copy running-config startup-config.
How do you set a default gateway on a switch?
To configure the default gateway for the switch, use the ip default-gateway command. Enter the IP address of the default gateway. The default gateway is the IP address of the router interface to which the switch is connected. Use the copy running-config startup-config command to back up your configuration.
Why would you configure an IP address on a switch?
If you want to be able to manage your switch remotely over the network, your switch needs an IP address. If your switch has multiple VLANs configured, and you want to be able to manage the switch from each VLAN, the switch requires an IP address on a VLAN interface in each VLAN.
How do I copy and paste in Qwiklabs Linux?
0:267:06How to Copy/Paste with the Terminal (Linux Tutorial) - YouTubeYouTubeStart of suggested clipEnd of suggested clipNow our usual process for doing this would be to select it and then either right click and copy orMoreNow our usual process for doing this would be to select it and then either right click and copy or control c. And then go into our our text file and then right click and paste or control v.
How do you copy and paste on Coursera Qwiklabs?
In the upper left corner, there are three dots. Clicking will open a menu. Look for "Text". If you paste in that editor and click "Send" then it will paste.
How to access Netlab+?
Students access the NETLAB+system via the web interface. Your instructorwill provide you with the URL or IP address of the NETLAB+server that you may access using your web browser. To access the login page, direct a browser to the IP address of the
What is remote access test?
Remote Access Test is performed during each user login. The purpose of the test is to attempt to establish an outbound TCP connection. This connection is necessary for remote device access, remote PC access and access to chat functions (chat functions will be available in a future software release).
What is Lab Access Page?
Lab Access Page is divided into several tabbed sections, allowing users to easily access all of NETLAB+‟s functions. The Topology, Action, Status, Connections, Load Save sections can be accessed by selecting the section name on the tab. Details on each of these sections is provided in section 8.
What port is used in NETLAB?
NETLAB+now allows the administrator to define the Remote Access Port (or list of ports) that may be used in place of the factory default, port 23.
What happens after successful login to MyNETLAB?
After successful login, the MyNETLAB student interface page will be displayed.
Can you use NETLAB+ in a classroom?
Your instructor may also choose to use the NETLAB+system within the classroom. The Instructor-led lab features of NETLAB+provide an effective way to teach new configuration tasks, as instructors lead their class through a lab exercise. Instructors can issue configuration commands to one or more devices while each student observes the process within a Telnet session initiated through NETLAB+.
Can you use the Scheduler to schedule lab time?
You may use the Scheduler to schedule lab time, if your instructor has chosen to enable this access to your class. The scheduling feature facilitates scheduled access to lab equipment.
ITC Netlab Access Instructions
The Netlab system at IHCC allows remote access to virtual machines and pods of real networking equipment and is used in a variety of courses at IHCC. The specific types of equipment and VMs you have access to will depend on your particular class. Contact your instructor if you have questions about the type (s) of pods used for your class.
Prerequisites
You must have an active ITC (campus.ihitc.net) domain account for which you know the password (contact your instructor for more information) to access the Netlab system
Accessing the Netlab System the First Time
After you are connected to ITCnet (by VPN or wired connection) you simply need to open a web browser and access https://ihcc-netlab.campus.ihitc.net
Special Notes on Networking Course Pods
In most networking courses you will be sharing equipment access with other students. Your configurations will be removed from devices at the end of your reservations and Virtual Machines may be reset next time you log in.
Special Notes on Linux System Administration Course Pods
In the Linux System Administration course you are assigned an individual pod. You are the only student who will be able to access the virtual machines in your pod and things you do to the virtual machines will be preserved from one session to another.
Frequently Asked Questions - Getting Started with NETLAB+
quently Asked Questions - NETLAB+ Support of CCNP 6.0
- Does NETLAB+ support the new CCNP v6 curriculum?
- What is the support status of the CCNP 6.0 - TSHOOT v1.0 - Troubleshooting and Maintaining Cisco IP Networks course?
- What is the support status of the CCNP 6.0 - ROUTE v1.0 - Implementing Cisco IP Routing course?
- What is the support status of the CCNP 6.0 - SWITCH v1.0 - Implementing Cisco Switched Networks course?
Frequently Asked Questions - NETLAB+ Product Line
- What is the difference between NETLAB Academy Edition® andNETLAB Professional Edition®?
- Why are NETLAB Academy Edition and NETLAB Professional Edition priced differently?
- What products can be hosted and automated with NETLAB+?
- Can I buy NETLAB+ and host any equipment?
Frequently Asked Questions - Equipment and Pods
Frequently Asked Questions - Security and Firewall
Frequently Asked Questions - Required Annual Maintenance
Answers to Frequently Asked Questions - Getting Started with NETLAB+
- How do I select the appropriate lab equipment for using Cisco Networking Academy content on …
Please review the lab equipment requirementsfor guidance on selecting courses, topologies, and equipment for your system. You may find it helpful to bookmark these pages for reference as you choose your lab equipment, install and administer your NETLAB+ system: 1. Lists of supported … - How is a typical NETLAB+ system racked?
Here is an example diagram of how a typical system may be racked. This example contains three (3) Multi-Purpose Academy Pod (MAP) pods and one (1) Network Fundamentals Pod (NFP). This example shows one of many ways the gear may be racked. There are other ways to rack the gea…
Wers to Frequently Asked Questions - NETLAB+ Support of CCNP V6.0
- Does NETLAB+ support Ciso Networking Academy CCNP 6.0 curriculum?
Thank you for your interest in using NETLAB+ to teach the CCNP 6.0 curriculum. Please be assured that NDG recognizes the importance of supporting this curriculum. Beta support of CCNP TSHOOT is available beginning with NETLAB+ version 2010.R2. Beta support of CCNP ROUTE a… - What is the support status of the CCNP 6.0 - TSHOOT v1.0 – Troubleshooting and Maintaining C…
Beginning with NETLAB+ software version 2010.R2, NETLAB+ provides beta support for the recently released first course of the CCNP v6.0 curriculum, CCNP TSHOOT using the Multi-Purpose Academy Pod (MAP). There are additional equipment requirements for the MAP pod w…
Answers to Frequently Asked Questions - NETLAB+ Product Line
- What is the difference between NETLAB Academy Edition® andNETLAB Professional Edition®
Please review the NETLAB+ Product Comparison Table for details on the each product version. Both product versions can be used to deliver a wide range of curriculum content. - Why are NETLAB Academy Edition and NETLAB Professional Edition priced differently?
NETLAB Academy Edition is discounted upfront with the right to use tied to a required annual software upgrade fee. This model provides a lower cost of ownership and keeps your system current as technology changes. The annual support fee is required for continued usage. NETLA…