1. Open a Command Prompt as administrator. 2. Use the net stop command to stop the BITS service providing the service name to stop. When you stop a service with net stop, you’ll see the service go into a pending state and then, if all goes well, a stopped state.
Full Answer
How to start/stop remote access service from command line?
You can use 'net start remoteaccess' and net stop remoteaccess' to start and stop the remoteaccess service from command line. Just the answer I was looking for. You can use 'net start remoteaccess' and net stop remoteaccess' to start and stop the remoteaccess service from command line. Just the answer I was looking for.
How to use the net command?
The NETcommand is used to manage services as follows: Syntax NET START [service] NET STOP [service] NET PAUSE [service] NET CONTINUE [service] Key service: The service name as shown in Control Panel, Services Examples: List the basic Services:
What is the use of net start and net stop command?
The net start command is used to start a network service or list running network services. Use the net statistics command to show the network statistics log for the Server or Workstation service. The net stop command is used to stop a network service. Net time can be used to display the current time and date of another computer on the network.
How do I stop a remote service in Windows 10?
While still in the command prompt type: SC COMPUTERNAME stop SERVICENAME and press enter. This will tell the remote service to stop, it will not auto refresh when it stops so you have to manually check, you can do this by typing: SC COMPUTERNAME query SERVICENAME.
How do you stop a remote service?
How to: Remotely Start or Stop Service from CMDStep 1: Find the service name. If you already know the name of the service skip to step two, if you are unsure of the name of the service start here. ... Step 2: Start or Stop the service. While still in the command prompt type: SC \COMPUTERNAME stop SERVICENAME and press enter.
How do you restart a remote service?
Sometimes while debugging, I need to restart a service on a remote machine....You can use mmc:Start / Run. Type "mmc".File / Add/Remove Snap-in... Click "Add..."Find "Services" and click "Add"Select "Another computer:" and type the host name / IP address of the remote machine. Click Finish, Close, etc.
How do I stop a remote service in PowerShell?
Method 3: Using PowerShell Get-Service -ComputerName computername -Name servicename | Restart-Service -Force. Get-Service -ComputerName computername -Name servicename | Stop-Service -Force.
How do I start and stop Windows services on a remote machine using C#?
Start/Stop Remote Windows Service From Client Applicationprivate void btnStartStop_Click(object sender, EventArgs e) {try {string serviceName = "ServiceName";string IP = "xxx.xxx.x.xx"; // remote IP.string username = "username"; // remote username.string password = "password"; // remote password.More items...•
What is the CMD command to shutdown?
How can I shut down or restart the computer from Command Prompt screen?shutdown /s command will shut down the system you are working on.shutdown / i from the command prompt will open the Remote Shutdown Dialog window, this will provide options available via an easy to use interface including networked systems.
How do I start a remote server?
Remote Desktop to Your Server From a Local Windows ComputerClick the Start button.Click Run...Type “mstsc” and press the Enter key.Next to Computer: type in the IP address of your server.Click Connect.If all goes well, you will see the Windows login prompt.
How do I stop a process in PowerShell?
The basic command syntax to forcefully kill a specific process is as follows: taskkill /PID process-number /F.
How do I stop and start services in PowerShell?
To start or stop a service through PowerShell, you can use the Start-Service or the Stop Service cmdlet, followed by the name of the service that you want to start or stop. For instance, you might enter Stop-Service DHCP or Start-Service DHCP.
How do I stop multiple services in PowerShell?
To stop multiple services can be stopped using Name or displayname by providing command (,) between them.
How can I check remote computer services?
How to: How to check and kill services running on a remote computer on the same networkStep 1: To display all services running on a remote computer. From command prompt, type: tasklist /s
How do I start a SC service?
Enable serviceOpen Start.Search for Command Prompt, right-click the top result, and select the Run as administrator option.Type the following command to enable a service and press Enter: sc config "SERVICE-NAME" start=auto In the command, replace "SERVICE-NAME" for the name of the service that you want to enable.
What is sc command?
The SC command communicates with the Windows Service Controller and installed services. When used with its create command option, you can use it to create a Windows service under which the Endeca Server will run.
Can you restart a computer remotely?
Restarting a computer using the command line Log in as an administrator. Open Command Prompt from the Start menu. Type 'shutdown /i' in the Command Prompt window and then press ↵ Enter. A window will open with the option to restart the remote computer.
How do you restart a service in powershell?
You can restart a windows service by using the Powershell cmdlet Restart-Service. Here, the parameter -PassThru force the command to wait until the service get restarted completed and displays its running status.
How do I connect to a remote computer service?
On your local Windows PC: In the search box on the taskbar, type Remote Desktop Connection, and then select Remote Desktop Connection. In Remote Desktop Connection, type the name of the PC you want to connect to (from Step 1), and then select Connect.
How do I start a SC service?
Enable serviceOpen Start.Search for Command Prompt, right-click the top result, and select the Run as administrator option.Type the following command to enable a service and press Enter: sc config "SERVICE-NAME" start=auto In the command, replace "SERVICE-NAME" for the name of the service that you want to enable.
What is the NET USE command?
The NET USE command first creates a connection to the remote computer with the credentials of one of its administrators. Then you can use the SC command to query the status of a service and start/stop or change its startup type. A few examples are:
How to see remote services?
In the main window, select the Services tab and after a few moments you should see all the services on the remote computer (refresh if not). Now you can view and control the remote services as if they’re on your own machine with buttons or context menu options to start, stop, set to autostart, on-demand startup (manual), or disable from starting. YAPM requires .NET 3.5 for Windows 10 users, a portable version is also available.
What is YAPM on a remote machine?
YAPM allows you to view the services and their details on the remote machine. It offers control of starting, stopping, or changing the startup type. There are two ways to remotely connect to another computer; either via the easier WMI interface, or launching a YAPM server process on the remote machine (this option doesn’t seem to work too well these days).
How to change connection type in YAPM?
Run YAPM and click the round Options button near the top left of the window, select “Change connection type” from the menu. This will bring up the connections window, click “Remote via WMI” followed by Disconnect, and then enter the remote computer name or IP address along with the remote admin’s username and password.
Where to find service name on Windows 10?
Alternatively, you can use the Control Panel Services applet (Services.msc) and double click the service to find the name near the top (pictured above). A useful resource for Service information including names for all versions of Windows is BlackViper.com.
How to find service name on computer?
The easiest way to use these tools is with the shorter service name, you can find names for services on your own computer if you’re not sure, open Task Manager and go to the Services tab, the Name column gives the name you need to use.
How to work on another computer without being in front of it?
One of the ways to work on another computer without physically being in front of it is of course via networking.
What is the net account command?
The "Net Accounts" command is used to set the policy settings on local computer, such as Account policies and password policies. This command can't be used on domain controller. This command is only used on local computer.
What happens to the settings when a computer is joined to a domain?
If computer is joined to a domain, the domain settings will take effect and only the settings coming from domain will be displayed. The rest settings will be the local settings if it's not coming from the Domain GPO.
What is the Windows NET.EXE command?
If you manage Windows Services and are comfortable working from the command line, then the Windows NET.EXE command should be in your toolkit. Use it to easily start, stop, pause or restart any service from an elevated command prompt, or in a convenient script/batch file.
Does Net pause and resume?
NET will also Pause and Resume Windows Services. Not all services support pause and resume, but if you have one that does, NET can come in handy there as well. To pause a service, type: net pause <Service-Name>. To resume a paused service, run: net continue <Service-Name>.
What is the default remote desktop connection value?
By default, this value is set to 1, But if you already enabled the Remote Desktop connection, then the value will be set to 0, Run the above-mentioned command to Disable it.
What is remote desktop connection?
It is one of the components of Microsoft windows that allow a user to take control of a remote computer or virtual machine over a network connection. To access Remote connection both the devices should be connected to the same network or to the internet. Once the connection is established the users can now access and take control of the other system. You can have unrestricted control over the Mouse, Keyboard, or basically the entire computer. Mostly Remote Desktop is used by IT professionals, Customer support representatives, Managed service providers, or MSPs. In most of the Corporate companies, Users use RDP to access the client machines to work remotely. As I mentioned above Remote Desktop is installed and enabled by default in all Windows Versions. This article will guide you to Disable Remote Desktop using Command Prompt or PowerShell.
How to run PowerShell as admin?
Open Windows PowerShell in admin mode, search for PowerShell in Cortana search, right-click and choose run as admin.
How to run a command as admin?
Open Run command with Admin Privileges. Search for command prompt in Cortana search right click on command prompt and choose run as admin.
What is remote desktop?
Mostly Remote Desktop is used by IT professionals, Customer support representatives, Managed service providers, or MSPs. In most of the Corporate companies, Users use RDP to access the client machines to work remotely. As I mentioned above Remote Desktop is installed and enabled by default in all Windows Versions.
Is it safe to modify the registry?
Note: Modifying the Registry is risky, and it causes irreversible damage to your OS Installation Follow the steps correctly. Friendly advice Before Modifying Registry Creating Restore Point is recommended.
How to disable remote desktop?
To disable Remote Desktop in Windows 8 and Windows 7: 1 Click the Start button and then Control Panel . 2 Open System and Security . 3 Choose System in the right panel. 4 Select Remote Settings from the left pane to open the System Properties dialog box for the Remote tab. 5 Click Don’t Allow Connections to This Computer and then click OK .
Why turn off remote desktop?
When you don't need the Windows Remote Desktop feature, turn it off to protect your computer from hackers.
What is VNC Connect?
VNC Connect remote access and control software allows you to interact with a desktop or mobile device anywhere on the internet. The two computers don't need to be the same type so you can use VNC Connect to view a Windows desktop at the office from a Mac or Linux computer. A limited non-commercial version of VNC Connect is free. Professional versions are available for a fee.
How to connect to a remote computer from a laptop?
Click the Start button and then Control Panel . Open System and Security . Choose System in the right panel. Select Remote Settings from the left pane to open the System Properties dialog box for the Remote tab. Click Don’t Allow Connections to This Computer and then click OK .
Why is remote access important?
Remote access is a useful feature when you need to access your computer from another location, such as when you need to connect to your home computer when you are at work. A remote connection is also handy in support situations in which you help others by connecting to their computers or when you need tech help and want to allow support personnel ...
How to select system from the list?
Press Windows + X and select System from the list.
Does Windows Remote Assistance work?
Another Windows utility, Windows Remote Assistance, works similarly to Remote Desktop, but it is specifically geared toward remote tech support and is configured differently with different requirements. You may want to turn this off as well, using the same System Properties dialog as Remote Desktop.
Question
I have RAS service running on a Windows 2000 Advanced Server. I have only one phone line that I use for making and receiving voice calls. The RAS servide is stopped. How can I automatically start the RAS service at some hour and stop it again at some other time? I knowthe AT command, but I don't know how to start and stop RAS from the commad line.
Answers
You can use 'net start remoteaccess' and net stop remoteaccess' to start and stop the remoteaccess service from command line.
All replies
You can use 'net start remoteaccess' and net stop remoteaccess' to start and stop the remoteaccess service from command line.
