Press MENU when the phone is not in use. Press or to scroll to Answering sys, then press SELECT. Press or to scroll to Ans sys setup, then press SELECT. Press or to scroll to Remote code, then press SELECT.
Full Answer
How do I access ANS SYS remotely from a touch-tone phone?
system remotely from any touch-tone telephone. The preset code is 19. You can set the code from 00 to 99. Press MENU when the phone is not in use. Press or to scroll to Answering sys, then press SELECT. Press or to scroll to Ans sys setup, then press SELECT. Press or to scroll to Remote code, then press SELECT.
Do you know the access code for a VTech DECT 6042?
We have a church phone VTECH DECT 6.0 Model 6042, We do not know the access code, or remember it. other than entering 9,999 numbers how can we find the code … read more Greg A. Engineer Bachelor's Degree 6,280 satisfied customers I am away from home and want to access my messages.
How do I purchase a VTech headset?
• To purchase a headset, visit us on the web at www . vtechphones .com or call VTech Cus- tomer Service at -800-595-95 . In Canada, contact VTech Telecommu- nications Canada Ltd . at www vtech- canada .com or - 800-267-7377 .
Why does my phone say phone in use?
"Line in use" is displayed if the line is currently active on a call. Confirm no one else is on the line. If you have multiple handsets, it is possible that one of them is turned on so check the rest of the handset and turn it off.
How do I remove CID from Vtech phone?
How to Delete Numbers in Caller ID on a V-Tech PhonePress the "CID" button on your VTech phone. Video of the Day. ... Use the up and down arrows to find the specific caller ID entry you want to delete. Press the "Select" button.Select the "Delete" option to remove the caller ID entry.
Why isn't my caller ID working on my Vtech phone?
If caller ID is not working on your V-Tech phone, ensure that your phone plan includes the feature. Caller ID is a subscription service that requires a monthly fee. If you have not subscribed, contact your service provider to add the feature to your plan. It may take several days before the feature is active.
How do you reset a Vtech cordless phone?
How to Reset a Vtech Cordless PhoneUnplug the power cable from the base of the Vtech.Reconnect the power cable to the base after a few minutes.Reinsert the battery into the handset.Put the handset in the handset cradle of the base. This will allow the devices to re-establish a link.
How do you troubleshoot a VTech phone?
Should this occur, we suggest this simple remedy:Unplug any power supplies connected to your product;Remove any installed batteries or battery packs;Wait 5 minutes;Plug the power supplies into the product;Install the batteries. ... Finally, try using your product as you normally would.
How do I get my caller ID to show up on my VTech phone?
1) Make sure your answering system is plugged into a live telephone jack and power source. 2) Make sure your answering system is turned on. 3) Some answering systems have an announce only option, which plays your greeting but won't record messages. Make sure your system is set to record messages.
Why has my caller ID stopped working?
Make sure that your device supports the Caller ID functionality (this can be found on the first pages of your operating instructions manual). Next, make sure that your telephone subscription includes the Caller ID function. To do this, you may contact your telephone service provider and ask them to enable it.
How do I activate my caller ID?
Step 1: On the Home Screen, tap Phone. Step 2: Press the left menu button and tap Settings. Step 3: Under Call settings, tap Supplementary services. Step 4: Tap Caller ID to turn it on or off.
How do I change the caller ID on my Vtech phone?
Press MENU/SELECT to move to the name. When the screen displays ENTER NAME, use the dialing keys to enter the name (up to 5 characters). Additional key presses show other characters of that particular key. Press MENU/SELECT to store the entry.
How do I reset my landline phone?
Try unplugging the phone and letting it sit for about 10 minutes. This should reset the phone. Try taking the battery out and then unplugging the base from the power and phone line.
How do you reprogram a cordless phone?
How to Program VTech Cordless PhonesPick up the VTech cordless phone from the base. ... Press the "Select" button when you have reached the directory menu. ... Enter in the number you want to save for this contact on the "Enter Number" screen which appears after you program the name.More items...
How do I sync my VTech phone to the base?
Turn on the Bluetooth feature of your cell phone and search for or add new devices. Press MENU/SELECT to set the telephone base to discoverable mode. Once your cell phone finds your VTech DS6321/VTech DS6322, press MENU/SELECT. Enter the PIN of the telephone base (the default PIN is 0000) into your cell phone.
How do I get rid of voicemail on my Vtech home phone?
Follow the steps below to purge all messages in your voice mailbox at once: Access your voicemail box on your phone by dialing *86 and entering your password. Follow the steps to listen to the messages in your voicemail box. When listening to the first message, press 7 to delete all messages.
How do you block numbers on a Vtech house phone?
Tip 1 of 1Press MENU when the phone is not in use.Press ▲ or ▼ choose Call block, and then press SELECT. Press ▲ or ▼ choose Block list, and then press SELECT.Press ▲ or ▼ choose Review, and then press SELECT.Press ▲ or ▼ browse through the directory.When the desired entry displays, Press DELETE.
How do I change the phone number on my Vtech phone?
Press MENU/SELECT twice. Scroll to >ADD CONTACT, then press MENU/SELECT. When the screen displays ENTER NUMBER: Use the dialing keys to enter the number (up to 30 digits).
How do you pair a Vtech cordless phone with a base?
On the base station, press the HANDSET LOCATOR button for at least four seconds, and then release the button. Both LEDs on the base station begin to flash. Press the # key on the handset to begin registration. The process takes up to 10 seconds to complete.
Do you have to turn on the built in answering system?
The built-in answering system must be turned on to answer and record messages.
Can you use a telephone base on a table?
The telephone base is ready for tabletop use. If you want to change to wall mounting, see page 9 for details.
Is a cordless phone private?
For this reason, you should not think of cordless telephone conversations as being as private as those on corded telephones.
Where is the headset jack on a VTech phone?
Plug the headset into the jack located on the right side of the handset (under the small rubber flap). Do not force the connection, but make sure the plug fits securely .
How to mount a phone on a wall?
• First insert the lower portion of the bracket into the grooves in the base, then snap the upper portion into place . • Mount the base on the wall by positioning the base unit so the mounting studs will fit into the holes on the base and wall mount bracket . Slide the base unit down on the mounting studs until it locks into place .
How to change from pulse to touch tone?
If you have pulse (rotary) service, you can change from dial pulse to touch tone dialing during a call by pressing * TONE. This is useful if you need to send touch tone signals for access to telephone banking or long distance services . . Dial the number . 2 . Press * TONE. Buttons pressed after this send touch tone signals . 3 . After you hang up, the phone automatically returns to pulse service .
How to answer a call on a cordless phone?
If you receive a call while you are out of range, the handset might not ring or if it does ring, the call might not connect when you press PHONE. Move closer to the base, then press PHONE to answer the call . If you move out of range during a phone conversation, you might hear noise or interference . To improve reception, move closer to the base . If you move out of range without pressing OFF, your phone will be left off the hook . To hang up properly, walk back into range, periodically pressing OFF.
What is position 2 on a phone?
This position is an alternate way to install your phone on a table or desk . Position two allows a different viewing angle to your handset and base unit . Refer to the position two diagrams above .
How many numbers can a phone hold?
Your phone can store up to nine telephone numbers with names (up to 5 characters and 24 digits in each location) in the speed dial memory locations you assign (numbered through 9) in each handset . These numbers can be dialed with two button presses . You can also store telephone numbers with names alphabetically in the directory . See Telephone Directoryfor instructions .
How to set the date and time on a telephony?
If you do not have caller ID service, you can set the date and time manually: • Press PROG,then press or until DATE/TIME is displayed . Press SELECT.
How to reset a phone that is not working?
Reset your Phone. If your telephone is not operating normally, disconnect the battery (s) from the handset and disconnect power from the base. After a few minutes , connect power to the base, install the battery (s) and cradle the handset in the base to allow it to establish a link. You can now try using your phone again.
Where can I find a replacement battery for a cordless phone?
If you are replacing the battery and you need assistance, visit our Battery Finder link. If a battery for your model is unavailable, you can search the Internet using the key words cordless phone batteries for an on-line supplier. If you prefer to purchase locally, you can look for a replacement battery at your area consumer electronics retailers. It is recommended that you take your present battery with you to insure your replacement is the correct size and has the correct plug (where applicable) and specifications (for example – 3.6v 400mAh Ni-Cd). Caution when replacing batteries