Remote-access Guide

motorola surfboard sb6121 setup remote access

by Dr. Francesco O'Hara Published 2 years ago Updated 2 years ago
image

Accessing the SB6121 Menu screen

  1. Launch a web browser, such as Internet Explorer, Firefox, or Safari.
  2. Enter http://192.168.100.1 into the address box. Press the Enter key. The Status page will appear.

Full Answer

How do I connect my sb6121 cable modem to my computer?

Connect the coaxial cable to a cable wall outlet (if not connected) and the Cable connector on the rear of the SB6121 cable modem. Hand-tighten the connectors to avoid damaging them. Connect the Ethernet cable to the Ethernet port on the computer or router and to the Ethernet port on the back of the SB6121 cable modem.

How do I access my Motorola surfboard cable modem?

Motorola Surfboard modem access. To access your surfboard cable modem open your web browser and use the IP address of 192.168.100.1. The default page that will open is the Status page. The information on this page gives a snapshot of a series of events that the modem goes through when establishing a...

What is the Motorola sb6121 surfboard DOCSIS cable modem?

The Motorola SB6121 SURFboard DOCSIS 3.0 Cable Modem provides operators with an economic option for providing Ultra-Broadband services, with four times the current maximum user data throughput approximating 160 Mbps in DOCSIS mode and 195 Mbps in EuroDOCSIS mode*, without the need for hybrid fiber coax (HFC) plant upgrade.

How do I register the sb6121 to surfboard?

Enter www.surfboard.com into the address box and press the Enter key. The service provider’s self-activation page may appear to register the SB6121.

image

How do I pair my Motorola SURFboard SB6121?

Install the SB6121Connect the coaxial cable to a cable wall outlet (if not connected) and the Cable connector on the rear of the SB6121 cable modem. ... Connect the Ethernet cable to the Ethernet port on the computer or router and to the Ethernet port on the back of the SB6121 cable modem.More items...

Is the Motorola SURFboard SB6121 a wireless router?

Wired modem only, does NOT include WIFI Router or VOIP Telephone adapter. Gigabit Ethernet port to connect to computer or Router for fast downloads. Internet speeds based on your Cable providers service - up to 172 Mbps download and 131 Mbps upload.

How do I access my Motorola SURFboard modem?

To access your surfboard cable modem open your web browser and use the IP address of 192.168. 100.1. The default page that will open is the Status page. The information on this page gives a snapshot of a series of events that the modem goes through when establishing a connection to your cable ISP.

How do I log into my SURFboard modem router?

Type 192.168. 100.1 (the default IP to access the admin interface) in the address bar of your internet browser to access the router's web-based user interface. You should see 2 text fields where you can enter a username and a password.

Is SURFboard SB6121 obsolete?

The SB6121 is being phased out and replaced by the SB6141. However there are many SB6121s still available for purchase, and we'll continue to provide technical support for this device.

How old is SB6121?

Motorola SURFboard SB6121Platform(Est.) release dateJuly 2010UPC612572186237 (UPC DB, On eBay)ASINB004XC6GJ0Country of manufChina25 more rows•Jul 31, 2022

Is there an app for Motorola modem?

Download the motosync app to set up, manage, and optimize your Motorola device. Dual-Band AX1800 Mesh WiFi, coverage up to 5,000 sqft. Tri-Band AC2200 WiFi, coverage up to 2,000 sqft.

How do I access my Motorola router settings?

Follow these instructions to login to your Motorola Router .Connect router cable to your Laptop or Computer. ... Open your web browser of choice and type IP address of your Motorola router in the address bar. ... Now enter the default username and password of your router by accessing the admin panel.

How do I access my cable modem settings?

What to Know. Connect your computer to your modem with an Ethernet cable, open a browser and enter your modem's IP address in the URL bar. The default user name (sometimes listed as SSID) and password are typically printed on the bottom of the modem.

How do I log into my SURFboard app?

InformationTap the ARRIS SURFboard Manager Icon. ... On the Login screen, enter admin in the User Name field and password in the Password field. ... Tap the Login button. ... On the SURFboard home screen, tap the Menu icon on the top-left corner. ... On the sliding menu, tap on Settings. ... Tap the Open Web GUI button.More items...

How do I find the IP address of my modem?

Right-click the Start button then select Command Prompt. Step 2: On the Command Prompt window, enter “ipconfig” and press the [Enter]. The numbers indicated on the Default Gateway section is your router's IP Address.

What is the Motorola router default username and password?

Default is Username: admin, Password: motorola.

What are cable modems used for?

Essentially, cable modems work as digital translators. They receive data signals from your ISP's network, then immediately translate them into a digital “language” for your routers to distribute across your local network via wired ethernet or Wi-Fi connection.

How do I fix my surfboard SB6121?

Resetting the SB6121Disconnect the coaxial cable. ... Power cycle the unit by disconnecting the power cord for 10 seconds, then reconnect the power cord.Click the Configuration link on top. ... Click the Reset All Defaults button (as shown below). ... When asked, Do you want to proceed?, click the OK button.More items...

What docsis does Comcast use?

Three categories (value, WiFi, and DOCSIS 3.1) help to sort the many options for Comcast XFINITY internet services....Full Comcast XFINITY Approved Modem List.BrandNETGEARModel #CM1000-1AZNASChannelsDOCSIS 3.1VoIP❌WiFi❌72 more columns

Should I upgrade my modem?

Typically, you should look to upgrade or replace your cable modem every two to four years. Newer cable modem technology, such as DOCSIS 3.1, can have a variety of improvements, including faster download speeds, faster uplink speeds, enhanced streaming capabilities, DOCSIS 3.1 capabilities and more.

What type of cable is needed for SB6121?

75-ohm coaxial cable with F-type connectors is required to connect the SB6121 to the nearest cable outlet. If a TV is connected to the cable outlet, 5 to 900 MHz RF splitter and two additional coaxial cables are required to use both the TV and the SB6121.

How to prevent SB6121 from overheating?

To prevent overheating the SB6121, do not open the unit or block the ventilation holes on the sides of the unit. Wipe the cable modem with a clean, dry cloth. Never use cleaning fluid or similar chemicals. Do not spray cleaners directly on the unit or use forced air to remove dust.

How to connect a coaxial cable to a splitter?

Connect the other end of the coaxial cable to the cable connector on the SB6121. Hand-tighten the connectors to avoid damaging them. Plug the power cord into the power connector on the SB6121. Plug the power cord into the electrical outlet.

How to avoid static electricity on cable modem?

Precautions. To avoid damaging the cable modem with static electricity, always first connect the coaxial cable to the grounded cable TV wall outlet. Before connecting or disconnecting the Ethernet cable from the cable modem or PC, always touch the coaxial cable connector on the cable modem to release any static charges.

What is Class B radio equipment?

These limits are designed to provide reasonable protection against harmful interference in a residential environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the device off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Where is the MAC address on a modem?

The SB6121 Media Access Control (MAC) label is located on the bottom of the modem. It contains a MAC address which is a unique, 48-bit value that identifies each Ethernet network device.

Is motorola intended for on line control?

The Product is not designed or intended for use in on-line control of aircraft, air traffic, aircraft navigation or aircraft communications; or in design, construction, operation or maintenance of any nuclear facility. MOTOROLA AND ITS 3RD

How to access surfboard modem?

To access your surfboard cable modem open your web browser and use the IP address of 192.168.100.1. The default page that will open is the Status page. The information on this page gives a snapshot of a series of events that the modem goes through when establishing a connection to your cable ISP. The important item that indicates if the cable modem is online is Cable Modem Status, which should indicate Operational (Operational could be displayed in more than one line, where the illustration below shows Done.) This can be determined by the Online light being solid.

What is the next page in the Surfboard modem?

The next page in the Surfboard cable modem to check and the most important in determining how good the connection is to your cable provider, is the Signal page .

What modems work with the Internet?

The Motorola Surfboard Cable Modems have been a mainstay for Internet connections and perform very well.

What is the power level of a cable modem?

Upstream Power Level- This reading should certainly be lower than 54, depending on specifics about your cable companies equipment, as an absolute maximum, but would be better to be in no higher than the high 40s. Also known as the transmit level or return signal, as it gets into the higher regions the cable modem will have a harder and harder time keeping connectivity.

How to access Motorola modem?

1. Open your web browser. You can access the Motorola modem through any web browser on a computer or device that is connected to your network. If you are attempting to access your router, check out this guide. Your router is where you can access wireless security, port forwarding, and other network settings.

Can customizing modem settings cause problems?

Customizing your modem's settings can cause certain devices to function improperly. Research what each setting does and what it may affect before altering the performance of any functions. Your changes may affect other users on the network as well.#N#Thanks!#N#Helpful 0 Not Helpful 0

Does a Motorola router need to be interfered with?

Your Motorola router processes the signal from your internet service provider and transmits it to your network. The modem doesn't typically need to be interfered with , but if you’re having connection difficulties and suspect your modem is at fault, checking the status is a quick and easy process. Follow this guide to learn how.

image
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9