Connect your DVR to your router Enter your DVR’s menu and go to networking to assign an internal IP and gateway this can be done automatically by selecting DHCP.The Local IP must be in the same Gateway range as the Router.
Full Answer
Can I access my H264 DVR from my mobile phone?
Therefore there must be a distributor that can support you with software for remote DVR remote viewing. Do you have a branded or non-brand DVR? To access your H264 DVR from your mobile phone, you first need to know if it has a brand.
How to configure DVR for remote viewing?
How to configure DVR for remote viewing 1 The types of DVR remote viewing. You can install the security cameras and set up the DVR using the manufacturer instructions and its cloud service or you can use port ... 2 Port forwarding for DVR remote viewing. ... 3 Video: Port forwarding for DVR remote viewing. ... 4 Extra information. ...
What ports do you use to access your DVR?
I have been able to setup the DVR on my local network and can access the DVR via a browser using the ports from the DVR. Defaults were 34567 and 80 for HTTP. I have since changed those ports but am still able to access so I know the ports themselves are working (right?)
How do I set up DVR port forwarding on my router?
Login into the router you need to look for the port forwarding menu, depending on the router you have, the menu can have different names such as Application &Gaming, Virtual Server, NAT, or PAT. The picture below shows the Lynksys router E1200 with the configuration for the DVR port forwarding. it's using the port 8080 and IP address 192.168.2.100.
How do I setup my DVR for remote viewing?
How to Remote Access a DVRCreate and Configure a Dynamic DNS Account.Set Up a Dynamic DNS on the Router.Connect the MPEG-4 DVR and Locate the DVRs IP Address.Setting up a Virtual Service on the Router.Install the Remote Viewer Software for Remote Internet Access.
How do I setup my H 264 DVR?
0:004:15H.264 Surveillance DVR Setup - YouTubeYouTubeStart of suggested clipEnd of suggested clipNext plug the camera power cable into the DVR and connect to a power source the DVR will boot up youMoreNext plug the camera power cable into the DVR and connect to a power source the DVR will boot up you should see a live view of your cameras on the screen. Press the menu button on the DVR or remote.
How do I connect my H 264 DVR to my iPhone?
0:042:06View Security Cameras on iPhone - DVR-88xxRT - H.264 Standalone ...YouTubeStart of suggested clipEnd of suggested clipClick on that to get to the device list and then click on add for the name you can call it anythingMoreClick on that to get to the device list and then click on add for the name you can call it anything you. Want. Then for the address enter in the IP address. That you got from the DVRs.
What is App of h264 DVR?
The MEye is an application for DVR remote monitoring. It runs on Android and IOS devices and is very easy to install and setup.
What is the default password for H 264 DVR?
Most likely the default username will be admin and password: empty, 12345, or 123456.
How do I connect my DVR to my phone?
0:316:00How to connect to a DVR using an Android Phone - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe first information you have to get is the internal IP of your DVR. The TCP port of the DVR. AndMoreThe first information you have to get is the internal IP of your DVR. The TCP port of the DVR. And the username and password to. Start we're going to click this icon right here on the top left corner.
How can I access my camera remotely?
How to view your IP camera remotely via a web browserFind your camera's IP address. ... Open a web browser and type the IP address. ... Go to SETTING > BASIC > Network > Information to find the HTTP port number used by the camera.After you change the port, you will need to reboot the camera in order to save the changes.More items...•
How do I view my DVR on my iPhone?
1:006:06How to connect to your DVR using an iPhone - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe username will be the username you use to login to the DVR and the password as well lastly willMoreThe username will be the username you use to login to the DVR and the password as well lastly will be the channel amount how many channels or how many cameras you have on your DVR.
How can I watch CCTV without Internet?
The cameras and the recording NVR connect with each other via the proprietary network. By connecting the NVR to a monitor via a VGA or HDMI cable, you can get 24/7 video surveillance for your property even without Internet connection.
Which is better H 264 or H 265?
The H. 265 codec compresses information more efficiently than H. 264, resulting in files of comparable video quality that are about half the size.
What is h264 camera?
H. 264 was developed to provide high-quality video at a much lower bit rate than standard MPEG-4 or JPEG. As a result, H. 264 compression represents a significant benefit to network security camera operations, offering enhanced images with reduced bandwidth.
Is h264 a codec?
A codec based on the H. 264 standard compresses a digital video file (or stream) so that it only requires half of the storage space (or network bandwidth) of MPEG-2. Through this compression, the codec is able to maintain the same video quality despite using only half of the storage space.
What is the default password of DVR?
The default passwords for your DVR or NVR are the same as the username.
How do I reset my DVR to factory settings?
To factory reset the device, unplug the DVR from power. Once power is removed from the unit, press and hold the factory reset switch for 4 - 5 seconds, continue holding the reset switch and plug the DVR's power supply back into the unit, you will hear a beep.
Why does my CCTV says no signal?
A CCTV test monitor is extremely helpful when troubleshooting camera video issues. One of the most common problems when a camera is not displaying video is a bad cable or BNC connection. Using a test monitor, you can temporarily eliminate the power and video cable that your camera is using.
How do I connect my CCTV to the Internet?
Connect Your CCTV Device to the Internet (DVR or NVR)Step 1: Securing Your Device and Establishing Internet Connection. ... Step 2: Indirect Connection (Mobile APP) ... Step 3: Indirect Connection - PC Browser. ... Step 4: Direct Connection - Setup. ... Step 5: Direct Connection - Mobile APP. ... Step 6: Direct Connection - PC Browser.
How to access DVR from outside network?
The default username is admin and the password is admin. Click login, then you will see the page of your Web Service. To access the DVR from outside the network or externally, the steps will be the same but the IP address will be your external IP address.
What is the IP address of a DVR?
By default ALL of our recorders and IP cameras have the same IP address. The default IP address is 192.168.1.108.
How to know if your DVR is on the same network as your home network?
First, you must review your network scheme to identify if your DVR or IPC (IP camera) is within the same network scheme as your Home/Office Network. There are a few ways to identify your network by simply going to the “Command Prompt” in your Windows PC.
What happens if you assign an IP address to a DVR?
This is due to the fact that if you assign an IP address to the DVR, NVR or IP camera that is already being used by a computer (hard wired or wireless), printer, or even a wireless handheld device you will have a collision in your network and you will not be able to access the device. In the next step I will show you how to see what IP addresses are available for you to use with your Digital Video Recorder.
Can I access my DVR from my router?
Make sure you access the DVR while you are not inside the location as the DVR, due to the fact that many routers will not allow you to access internal devices from within the network using the external IP Address. I hope these steps will guide you through setting up your Network devices and DVR for remote access.
What port is remote viewing on a DVR?
As you can see, now it's possible to use the DVR remote viewing feature using a web browser (port 8080) or a software (port 37777).
What is the default port for a DVR?
Go to the DVR's network menu and check which port is used for software. Let's say you are using a Dahua DVR, the default port is 37777 or if you are using a Hikvision DVR the default port is 80000. Make sure to check your DVR. Open your web browser again and use the port for the configuration.
Can you use the same principle to configure IP cameras for remote viewing?
You can use the same principle to configure IP cameras for remote viewing.
Can you add videos to your watch history?
Videos you watch may be added to the TV's watch history and influence TV recommendations. To avoid this, cancel and sign in to YouTube on your computer.
Can you configure a router?
As long as you have the necessary information you can configure the router.
How to access H264 DVR?
To access the H264 DVR directly on your mobile phone, go to the playstore and install the App. See the images below. Make sure you are your are downloading the correct version of the Meye app, because in Playstore there are other similar apps. Download the App that is developed by Meyetech.
What is a H.264 DVR?
Some DVRs have the following names in the front part: Network H.264 DVR. H.264 Digital Video Recorder. Digital H.264 Recoder. H.264 DVR. There are other variations of the name, but none of them represents the brand but rather the type of compression (CODEC) that it uses. They are non-branded DVRs manufactured in China and passed to ...
Why is my DVR not connecting to the internet?
If the application stays for a long time showing the message "connecting" something is wrong with the Internet link, it may be slow or maybe some firewall is blocking the DVR from the Internet or internal network.
Where is the Alartec logo on a DVR?
We will use the Alartec brand as a DVR brand example, when you purchase an equipment from that company you can see the logo somewhere, usually on the frontal part of the DVR and also on the configuration menu.
Is the installation of a symlink fast?
The installation is simple and very fast, but bring the adds with it.
Is H.264 a brand?
I do not know exactly what might be written on the front part of your DVR, but I can assure you that H.264 is not a brand!
Do you have a branded or non-brand DVR?
To access your H264 DVR from your mobile phone, you first need to know if it has a brand. If it's a branded model probably it will have an operation manual and a technical support number, which is very good.
