Remote-access Guide

how to setup aruba remote access point

by Cara Yundt Published 1 year ago Updated 1 year ago

1. Navigate to Configuration > AP Installation (under Wireless.) 2. Select the required remote AP under the Provisioning tab and then click Provision. 3. Select Yes for Remote AP and Certificate for Remote AP Authentication Method. 4. Click Apply and Reboot to apply the configuration and reboot the AP as certificate RAP.

Full Answer

How to configure Aruba access points as a secure remote access point service?

Make sure that the L2TP IP pool configured on the local controller (from which the remote AP obtains its address) is reachable in the network by the master controller. The tasks for configuring an Aruba Access Points as a Secure Remote Access Point Service are: Configure a public IP address for the controller.

How to create WLAN for aruba123?

wpa-passphrase "Aruba123!" ! //aaa-profile and ssid-profile is linked to the Virtual AP Profile. ! ap-console-password "Aruba123!" ! ! You can also create WLAN using the wizard under "Configuration -> WLANs". All the configuration are done on the "default" ap-group.

How to convert instant AP to rap in ArubaOS?

Conversion: Instant AP can also be converted to RAPs by pointing to IP address of the Mobility Controller Hope you find this useful. Please post your feedback ! 2. RE: ArubaOS 8 - Setting up Remote Access Point (RAP)

How do I enable the license for the Aruba 7005 controller?

Bring up the Controller in Standalone mode: RAPs do not require PEFV. Only the regular AP licenses (AP, PEFNG). Once Installed, Please ensure that "Feature Enabled" checkbox is ticked. This will enable the license. Aruba 7005 Controller - 0/0/1 - Connected to My Lab (Internal Network) L2 and L3 Interfaces - Configuration snippet:


How do I setup my Aruba wireless access point?

Connect the power cable to the power supply.Connect the power cable to the Aruba AP and plug the power into power.Connect the provided network cable to the black E0/PT connection on the bottom of the Aruba AP. ... Connect the other end of the network cable into an open port on your wireless router.More items...•

How do I setup a remote access point?

0:482:26Remote access point set-up demo - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd plug it in until you hear it click into place. Now you need to locate an empty Ethernet port onMoreAnd plug it in until you hear it click into place. Now you need to locate an empty Ethernet port on your home router or modem and plug in the other end of the ethernet cable.

How do I add an access point to my Aruba controller?

To add an Instant AP to the network:Navigate to the Configuration > Access Points page.Click + in the Access Points table.In the New Access Point window, enter the MAC. A MAC address is a unique identifier assigned to network interfaces for communications on a network. address for the new Instant AP.Click OK.

How do I set up AP 93 in Aruba?

0:564:46CONFIGURING THE ARUBA AP93 WIRELESS ACCESS POINTYouTubeStart of suggested clipEnd of suggested clipIt takes us straight in and the first thing that we'll have to do is select the country chords.MoreIt takes us straight in and the first thing that we'll have to do is select the country chords. Select ok and you'll see there the network that's currently configured is called instant.

What is Aruba remote access point?

Remote_AP. The Secure Remote Access Point Service allows AP users, at remote locations, to connect to an Arubacontrollerover the Internet. Since the Internet is involved, data traffic between the controllerand the remote AP is VPN encapsulated. That is, the traffic between the controller and AP is encrypted.

What is the default IP address of Aruba access point?

The default IP address of the controller is 172.16. 0.254. Connect a PC or workstation to any line port on the controller, then enter this IP address into a supported Web browser to launch the Setup Wizard. To run the Setup Wizard: 1.

Do Aruba APs need a controller?

Aruba Instant is a wireless access point operating system and platform that does not require the purchase of hardware/virtual controllers for deployment.

How do you associate AP with a controller?

0:598:38Lightweight Access Point Registration with Wireless LAN Controller (WLC)YouTubeStart of suggested clipEnd of suggested clipProcess first the AP needs to get an IP. Address. Next the access point needs to find candidateMoreProcess first the AP needs to get an IP. Address. Next the access point needs to find candidate controllers to which it can register.

How do you deploy an access point?

See the section Plan the configuration of wireless AP's in NPS below for related information.Verify wireless AP support for standards. ... Identify areas of coverage for wireless users. ... Determine where to install wireless APs. ... Plan wireless AP and NPS RADIUS Client configuration. ... Plan the use of PEAP Fast Reconnect.More items...•

How do I reset my Aruba 305 Access Point?

To reset a n Instant AP, perform the following steps:Turn off the Instant AP.Press and hold the reset knob using a small and narrow object such as a paperclip.Turn on the Instant AP without releasing the reset knob. The power LED. ... Release the reset knob. The Instant AP reboots with the factory default settings.

How do I access the Aruba Virtual Controller?

In the Instant UIClick the System link at top right corner of the Instant main window. The System window appears.Click the Show advanced options link. The advanced options are displayed.In the General tab, enter the appropriate IP address in the Virtual Controller IP text box.

What is a remote SSID?

SSID is simply the technical term for a Wi-Fi network name.

How can I access my router as an access point?

Simply connect the access point to one of the ports of your existing wired/wireless router then configure the access point's wireless settings.Open the access point's web-based setup page by entering the default IP Address “192.168. ... On the web-based setup page, click on Wireless.Enter the Network Name (SSID).More items...

What is the step by step procedure in setting up remote desktop?

How to Set Up Remote Desktop Windows 10. To set up a remote desktop in Windows 10, go to Settings > System > Remote Desktop. Then turn on the slider for Enable Remote Desktop. Next, search Settings for Allow an app through Windows firewall and enable the Remote Desktop app for Private and Public.

How do I access my ubiquiti access point remotely?

UniFi OS consoles can be accessed remotely at We recommend using our UniFi OS Consoles and Gateways for the most seamless remote access experience because it eliminates issues introduced by third party factors.

What is remote AP?

The remote AP requires an IP address to which it can connect to establish a VPN tunnel to the controller. This can be either a routable IP address you configure on the controller, or the address of an external router or firewall that forwards traffic to the controller.

How to configure L2TP IP pool?

To configure the L2TP IP pool, click Add in the Address Pools section. Configure the L2TP pool from which the APs will be assigned addresses, then click Done.

How to whitelist AP?

Navigate to Configuration > AP Installation (under Wireless) and then click the RAP Whitelist tab on the right side.

How to provision an AP?

The easiest way to provision an AP is to use the Provisioning page in the WebUI, as described in the following steps: 1. Navigate to the Configuration > Wireless > AP Installation > Provisioning page. Select the remote AP and click Provision. 2.

How to find IP address parameter in local database?

To view IP address parameter in the local database, navigate to the Configuration > Security > Authentication > Servers > Internal DB page .

What port does a secure controller use?

Communication between the AP and the secure controller uses the UDP 4500 port. When both the controller and the AP are behind NAT devices, configure the AP to use the NAT device’s public address as its master address. On the NAT device, you must enable NAT-T (UDP port 4500 only) and forward all packets to the public address of the NAT device on UDP port 4500 to the controller to ensure that the remote AP boots successfully.

What port is NAT T?

On the NAT device, you must enable NAT-T (UDP port 4500 only) and forward all packets to the public address of the NAT device on UDP port 4500 to the controller to ensure that the remote AP boots successfully.

How to upload a certificate to Captive Portal?

Step 2: Open the Certificates tab. Step 3: Choose the certificate file you want to upload. Step 4: Choose Auth for Certificate Type. Step 5: Choose your certificate format. Step 6: Click Upload Certificate. Step 7: Repeat steps 3-6, but use Captive Portal Server for Certificate Type.

How to create a captive portal?

A captive portal authentication profile must now be created. Step 1: Open the External Captive Portal tab. Step 2: Click New. Step 3: Enter the settings from the table below into the form. Step 4: For the URL setting, replace AP_MAC_ADDRESS_HERE with the MAC address of any one of the APs in your network.

Does AP reboot after uploading certificates?

Note that the AP may reboot automatically after uploading one or both of these certificates. To verify that the certificates have been uploaded properly, in the Certificates tab, you should see an entry for Current Server Certificate and for Current CP Server Certificate. Take note of the Common Name of the certificate by checking the value after CN= in the Subject field.

Do you need to upload a certificate to Aruba IAP?

You must upload your own certificate to the Aruba IAP. Without doing this, the default Aruba certificate will be used which will cause security warnings for most users, and may even prevent them from connecting to the captive portal.

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9