how to remote access linksys wireless router

Accessing a Linksys router from a remote location Step 1: Using a computer that’s connected to the Internet from a remote location, launch a web browser and enter “http://0.0.0.0:8080”, where 0 represents the router's Internet IP address, and 8080 represents the specified port on the Address field.

Full Answer

How do I access my router remotely?

To remotely access your router from your Windows computer:

• Connect your computer or Wi-Fi device to a different Wi-Fi network.
• Click the genie icon on your desktop or in the Windows taskbar. ...
• Select Router Settings. ...
• From the Login as menu, select Remote Access.
• Type your remote genie email and password and click the OK button. ...

More items...

How to setup Linksys wireless router as access point?

Steps Download Article

1. Start with a wired PC. Document your current network's IP address scheme. ...
2. On the back of the router, remove the "Run CD First" tape. Do not connect any cable to the "WAN" port ...
3. Disconnect the existing network cable from the network jack of your PC, set it aside for now. ...
4. Power the router. ...

More items...

How do I resecure my Linksys wireless router?

• After logging in the router's user interface, click the Wireless tab then click the Wireless Security sub-tab.
• On the Configuration View section, click the Manual radio button. ...
• On the Security Mode field, select WPA2 Personal. ...
• Enter your Passphrase/Password. ...
• Click Save Settings once you're done.
• Your wireless security settings have now been updated. ...

How to log into any router remotely?

Procedure 2: To connect to your router remotely from a Windows computer, follow these steps:

• Home screen is shown. Choose Router Settings. The Router Login dialog box appears. Select Remote Access from the Login menu.
• click the OK button. The Wireless Settings dialog box appears.
• manage the router remotely. Make sure the router you want to remotely manage is selected in the Router Model menu at the bottom of the Wireless Settings window.

Can I access my wifi router remotely?

All you need to do is type the router IP or default gateway address in the web browser. Next, enter your username and password. Now, once you are in the router's web portal, look for the Remote Management option. Some routers called it Remote Access and it's usually found under Advanced Settings.

How do I access my wireless router from remote location?

When you want to access your router from inside the network; all you have to do is type in the router's IP address in the web browser. Similarly, to access your router from outside, you need to type in your public IP address followed by remote control port no i.e. 8080. So, if your public IP address is 74.12.

How do I log into my Linksys Smart WIFI?

Accessing your Linksys Smart Wi-Fi through a web browserLaunch a web browser.Enter your router's default IP address, "192.168. ... Enter your Router Password then click Log in.Launch a web browser and enter “linksyssmartwifi.com” in the Address bar then press [Enter].More items...

Can I access my network remotely?

You can access your home network remotely by manually turning on the remote management feature on your home router. You should also set up dynamic DNS to tackle the dynamic public IP address problem. Other options include a remote access VPN, third-party apps like “TeamViewer”, or a “Remote Desktop”.

Can I access my router from my phone?

In Android, settings menus vary from phone to phone, but once you find the Wi-Fi settings: Make sure your phone is connected to your router's Wi-Fi network. Tap on the network name. Look for a 'gateway', 'router' or other entry in the list.

How do I connect to a network in a different location?

What you need is a Branch Office VPN(Virtual Private Network). A VPN is a method of connecting two separate networks securely through the internet using shared credentials. This technology is installed on your routers/firewals, and knows the internal network range and external IP address of the other router.

Why can't I access my Linksys router settings?

To resolve this issue, you can reset your router to factory default settings, uninstall and reinstall the Linksys Connect Software on your main computer, then reconfigure your router's settings through Linksys Connect. To learn how to reset your router to factory settings, click here.

What is the IP address for Linksys router?

192.168.1.1Unless it is changed, your Linksys router's default local IP address (also known as the Default Gateway) is 192.168. 1.1.

What is the admin password for Linksys router?

admin”Linksys routers use “admin” as the default administrator password.

How can I control my WIFI remotely?

0:091:36How to Control Your Network from Anywhere with your Android PhoneYouTubeStart of suggested clipEnd of suggested clipYou can select as cific device to see detailed information about the device block the device fromMoreYou can select as cific device to see detailed information about the device block the device from accessing the internet or even see the devices web.

How do I find my router's IP address without connecting?

1.1" or "192.168. 0.1." If you cannot find your router's IP address, click "Start," type "cmd" and press "Enter." Type "ipconfig" in the Command Prompt window and press "Enter." Look for "Default Gateway" to locate the IP address.

Where is Remote Management on Netgear router?

Some routers called it Remote Access and it’s usually found under Advanced Settings. On Netgear router, you can find this option under Settings > Remote Management.

How to share a router?

Part 1: Turn On remote sharing. Turning on remote sharing on the router is easy. All you need to do is type the router IP or default gateway address in the web browser. Next, enter your username and password. Now, once you are in the router’s web portal, look for the Remote Management option.

How to find which DNS service to choose?

The best way to find, which service to choose, is by checking which service is supported on your router So follow these steps. 1. Login to your router and look for an option that says Dynamic DNS. If it’s not there, then you can download IP updater software from any Dynamic DNS provider.

What is the IP address of a router?

8080. So, if your public IP address is 74.12.168.14, then you’ll have to type 74.12.168.14:8080 on the web browser. 1.

Can I connect an external hard drive to my router?

And finally, you can connect an external hard drive to your router and access it from anywhere.

Can I access my DDNS from my router?

So now that you have set up DDNS and remote access on your router, you can access it from anywhere via the Internet. In case you have an old router here are some tips on how to boost network on your old Wi-Fi

How to connect to router A?

First you'll need to find out Router A's IP address. Connect a computer to Router A via Wi-Fi or with a network cable through one of its LAN ports.

What happens if you connect Router B to Router A?

Now if you connect Router B (which is no longer a router) to Router A using a network cable (from LAN port to LAN port), it will function as an Access Point giving you better Wi-Fi range for your devices.

Why does WAN make a router work like a router?

Using the WAN will make the router automatically function like a router because that's the intended role of the device: a router connects to the Internet and shares that connection with the rest of the network it hosts. That will no longer be the function of Router B in our project.

What is 192.168.1.1?

For this guide, we'll assume 192.168.1.1 is Router A's IP. This will also likely be your case because many home routers (from Netgear, Asus, D-Link etc.) tend to use this IP address by default.

How to find router IP address?

Head to System Preferences > Network > select the current connected connection (you should see a green dot signifying the connection is working)> click on Advanced > on the TCP/IP tab, look for "Router:". The router's IP address will be shown next to it.

What is the IP address of a router?

For example, if the router IP address is 192.168.1.1 then the IP pool of addresses will range from 192.168.1.2 to 192.168.1.254. If the router's IP is 192.168.1.254 then the IP range will be 192.168.1.1 to 192.168.1.253. When a device is connected to Router A and has an IP address within its IP range, it will be accepted as part of the network. It would take a whole separate video and an entire other article to explain why it works this way, but just trust that it does.

How to determine IP range of router?

Once you have the router's IP address (which always consists of four groups of numbers separated by a dot in between each group) use it to determine its IP range. The range of numbers you'll be able to select from will use the same numbers for the first three groups with the last group ranging from 1 to 254. The router's current IP address will not be available to use.

How to access USB storage on Linksys router?

Step 1. Plug your USB storage into the back of Linksys router, and then click here to sign you’re your account to access the dashboard of the Wi-Fi router. Tip: If you don’t have an account, you can click on the Don’t have an account option below the sign-in box. Step 2.

Does Linksys have a USB drive?

As you know, the newer Linksys routers come with a File Server feature that enables you to access USB storage. How to access USB storage on Linksys router? Many people are searching for a guide online. Now, MiniTool will walk you through detailed steps to share a USB drive on Linksys router.

Can I share a USB drive with my router?

If you want to share a USB drive or other external storage drives with your computer and devices in your home, you can take a look at your router. With a relatively modern router like Linksys router, it has a chance to do these works. Once you set up successfully, you are able to access the USB drive and share files through the Wi-Fi router.

How to back up Linksys router?

To do so, follow these steps to back up your linksys wireless router configuration. Once that is completed, make sure you are connected to your router using a wired connection. Then in the administration utility, click on the Administration tab.

Where is the Save Settings button on my router?

Now, in the Web Access section check the Disabled box next to Wireless Access Web: (also make sure HTTPS is checked) and click the Save Settings button at the bottom of the page.

What is the best encryption for home wireless?

For many home wireless routers, that would be WPA2.

Can you access the administration utility via a wired connection?

Doing so, will prevent any wireless user from taking over control of your router, and locking you out or making changes that will leave your network vulnerable. This means that you will only be able to access the administration utility via a wired connection.