As long as you can make a remote connection to the DVR via your internet connection, you’ll be able to pull this off. If you are using a static IP address, just make sure your router points that to your DVR and you will be able to remote view your security camera system at anytime.
Full Answer
Is static IP address necessary for remote access and remote viewing?
Many customers think that static IP address provided by Internet Service Provider or ISP is necessary for remote access and remote viewing of cameras. While having static IP address may be helpful, it is not necessary to have it and pay extra for it every month.
How do I remote view my DVR or IP camera?
1.) First Make sure your DVR or IP Camera support remote viewing 2.) Second you need to obtian the ip address and the port of your DVR or IP camera. Typically you can find this under network within the system menu of your DVR or IP camera. 3.)
How do I setup remote Internet access for the JPEG DVR?
Please follow these setup instructions to setup remote Internet access for the dual codec JPEG DVR: Assign your DVR an IP Address. Connect to your DVR on your LAN - Local Area Network. Setting up Port Forwarding on your Router. Setting up a Static DHCP IP address for your DVR.
Do I need static IP address to view my cameras online?
Do I really need static IP address to view my cameras online? Many customers think that static IP address provided by Internet Service Provider or ISP is necessary for remote access and remote viewing of cameras. While having static IP address may be helpful, it is not necessary to have it and pay extra for it every month.
How do I set a static IP on my DVR?
0:232:37How to Configure the IP Address of the DVR on your Local ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo I'm just go to main menu go to advanced go to network and you can see here it's setup tcp/ip typeMoreSo I'm just go to main menu go to advanced go to network and you can see here it's setup tcp/ip type static okay. So you have a few different options but for this case we're going to use static.
How can I remotely access my DVR without static IP?
Step1: Login Camera on Web Browser > Now Go to Config Tab > Network > Put HTTP Port and Server Port - By default HTTP Port 80 assign (i.e 81 and 6036)> Check mark on use the Following IP Address > Assign IP Address on Camera as given example > Apply.
How can I access my DVR remotely?
How to Remote Access a DVRCreate and Configure a Dynamic DNS Account.Set Up a Dynamic DNS on the Router.Connect the MPEG-4 DVR and Locate the DVRs IP Address.Setting up a Virtual Service on the Router.Install the Remote Viewer Software for Remote Internet Access.
How can I see my CCTV online with static IP?
How to view your IP camera remotely via a web browserFind your camera's IP address. ... Open a web browser and type the IP address. ... Go to SETTING > BASIC > Network > Information to find the HTTP port number used by the camera.After you change the port, you will need to reboot the camera in order to save the changes.More items...•
Is static IP required for CCTV?
Yes, security cameras use IP addresses to identify themselves to other digital devices such as a DVR/NVR. If you use an NVR, the recorder itself assigns an IP address to the security camera. Otherwise, you'd have to manually assign a static address to your security camera.
How does DDNS work with DVR?
The DVR will only use its DDNS functions in a situation where the DVR is assigned its IP address by the Internet Service Provider (ISP). Your DDNS provider will prompt you to select a username and password. It will issue you a name server address that you will now use to connect to your DVR instead of using the IP.
What is RTSP port for DVR?
RTSP stands for Real Time Streaming Protocol. RTSP allows you to pull a live video stream from your camera and view it from different devices and programs. Its primary uses are to pull a video feed from a camera to an NVR, viewing software, or even home automation solutions.
How do I find the IP address for my DVR?
0:152:10How to check the IP address of your NVR or DVR - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo common to both dvrs. And nvrs is you go to main menu. And it may ask you for a graphical passwordMoreSo common to both dvrs. And nvrs is you go to main menu. And it may ask you for a graphical password log in. And go to network then go to tcpip. Under network and tcp it'll give you an ip address.
How can I access my DVR from my phone?
0:316:00How to connect to a DVR using an Android Phone - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe first information you have to get is the internal IP of your DVR. The TCP port of the DVR. AndMoreThe first information you have to get is the internal IP of your DVR. The TCP port of the DVR. And the username and password to. Start we're going to click this icon right here on the top left corner.
How can I connect my DVR to my computer without Internet?
Firstly, go ahead and setup your DVR near your computer, close enough to connect to it by the ethernet cable. Inserting one end to the DVR and the other end to your computer. For the time being you will need to connect a monitor or TV to your DVR so that you can change the Network Settings to match your computers.
What is the IP address of my DVR?
0:002:10How to check the IP address of your NVR or DVR - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo common to both dvrs. And nvrs is you go to main menu. And it may ask you for a graphical passwordMoreSo common to both dvrs. And nvrs is you go to main menu. And it may ask you for a graphical password log in. And go to network then go to tcpip. Under network and tcp it'll give you an ip address.
How do I connect to NVR remotely?
There are 6 steps to setting up your NVR for remote viewing:Understand Your Network.Setup DDNS.Setup A Port Forward.Assign The DDNS Hostname To Your NVR.Set Two IP Addresses For Your NVR.Verify That Local Viewing and Remote Viewing Work.
How do I find the IP address of my CCTV camera?
The easiest way to find the security camera IP address is to check the Network page on the CCTV camera software (mobile app or PC client). The network page will display all the IP address information of your camera.
Why can't I see my CCTV remotely?
What to Do If You Cannot Remotely View Security Cameras Using the Internet via Port Forwarding. Make sure your cameras are connected to the network. Ensure all the ports of the network configuration are mapped to the Internet. Open the firewall in the router to allow Internet access to the camera.
What port is remote viewing on a DVR?
As you can see, now it's possible to use the DVR remote viewing feature using a web browser (port 8080) or a software (port 37777).
What is the default port for a DVR?
Go to the DVR's network menu and check which port is used for software. Let's say you are using a Dahua DVR, the default port is 37777 or if you are using a Hikvision DVR the default port is 80000. Make sure to check your DVR. Open your web browser again and use the port for the configuration.
How to make port forwarding work?
All you have to do to make this port forwarding process to work is to set up the DVR and the router using the IP and port numbers.
What is the IP address of Lynksys router?
The picture below shows the Lynksys router E1200 with the configuration for the DVR port forwarding. it's using the port 8080 and IP address 192.168.2.100.
How to find my router's IP address?
From your laptop (or PC) just open a web browser and type the IP address of your router. It should pop-up a screen asking for the username and password.
What port number is used for TCP and UDP?
Obviously, your network is different from mine so the IP address should be another one but you can use this port number (8080) for your configuration. Look at the picture, you can see the name rule, the port number that is repeated twice, the protocol "Both" which represents TCP and UDP and the IP address.
Can you use the same principle to configure IP cameras for remote viewing?
You can use the same principle to configure IP cameras for remote viewing.
What is the default port for a DVR?
On the IP config setup screen, confirm the port number of your DVR as seen below. The default port is 50000.
What is the DVR viewer software?
The DVR viewer software runs only Microsoft Windows based computers. The iDVR-PRO includes software for Mac and Windows, as well as mobile apps for iOS and Android. The instructions to setup the DVR viewer are broken up into the following sections, which include router and network setup instructions.
What is dynamic DNS?
Dynamic DNS is used to when the Internet connection you will be using for your DVR uses a dynamic IP address. If you are unsure if your Internet service provider (ISP) provides you with a dynamic or static IP address, please call or email your ISP's technical support department. CCTV Camera Pros has instructions for D-Link and LinkSys routers. The instructions are based on certain models but are likely the same or close to the same for other models of D-Link and LinkSys routers and switches. If you need specific instructions for you router, please consult the manual that came with it and look under the section that has to do with Dynamic DNS support. Most modern router/switches support dynamic DNS.
How to set DHCP to auto?
With the DHCP mode set to automatic, your DVR will allow your router to assign it an IP address. While still on the DHCP setup screen, select Detect IP and press enter. The screen should refresh.
What software does a JP surveillance camera use?
Our JP Surveillance DVRs come with remote surveillance viewer software that allows you to view your security cameras over the Internet. The JP DVR viewer also lets you review previously recording surveillance video footage. The software was included on a CD that shipped with these DVRs when they were being sold. Please note: these DVRs have been replaced by CCTV Camera Pros iDVR-PRO. The surveillance software for the JP DVR can still be downloaded here: DVR Viewer Software Downloads. The DVR viewer software runs only Microsoft Windows based computers. The iDVR-PRO includes software for Mac and Windows, as well as mobile apps for iOS and Android.
How to log into DVR?
Login to your DVR by pressing the menu button on the DVR or on the wireless remote control. When you are prompt to enter a password, just press the OK button on the DVR or remote. The default admin password for the DVR is blank. If you have already setup an admin password for your DVR, then enter this, then press OK.
How to setup DHCP on DVR?
From your DVRs System menu, select External Device. On the External Device menu, select TCP/IP Setup. On the TCP/IP Setup screen, select DHCP setup and press enter.
What is a DVR receiver?
The DVR software that was included with JPEG DVRs is called the integrated remote station (IRS). One of the applications in the IRS is a transmitter that allows you to watch your security cameras over the Internet or Intranet (internal network / LAN). The transmitter is meant to replace the DVR viewer that was used in the last version ...
What is the default port for a DVR?
On the IP config setup screen, confirm the port number of your DVR as seen below. The default port is 8000. If your DVR is not set to port 8000, please edit this value to set to 8000. NOTE: please ignore that the below screen shot shows port 50000. Port 50000 was used for the last version of the JPEG DVR.
What port is used for DVR?
Remember: Your DVR is going to use port 8000 (not 50000). 50000 was the default port for legacy non-dual codec DVRs).
How to connect Manul to DVR?
On the main IRS screen, click on the IRS Setup button. On the IRS Setup screen, click on the Registering Site button. This will open a new Window where you can add the settings to connect to your DVR. This screen can be seen below. A) Select Manul for CONNECTION.
How to see live view on DVR?
Press the Menu several times on your DVR or remote until you exit out of the DVR menu system and see the live view of your cameras.
How to connect to DVR externally?
In order for you to connect to your DVR internally or externally within your network, you’re going to have to make sure that your browser is able to download the web service from the DVR. Just go to Tools > Internet Options > Security. IE Tools Menu. In this tab, you will see a button that says Custom Level.
How to connect to DVR from outside?
When you have the ability to connect from outside of the network you are in, type in your Public IP Address into the URL bar on Internet explorer and make sure to add the ‘:88’ at the end. You should see the ActiveX web service prompt. If you are able to connect to the DVR internally but are unable to once you are outside of that network, it will more than likely be a port forwarding issue. Check your settings and try again.
How to log into my router?
Log in to your router using the gateway IP address and username and password that has been set to it. By default, most routers have their default gateway IP address set to 192.168.1.1. This is what you will type into the URL bar of your browser. Once you put that in and hit Enter, a window should pop up asking you to log in. If you haven’t made any changes you should be able to put ‘admin’ into the username and ‘admin’ into the password field as well. Some Routers may have their password defaulted to ‘password’. You will have to check your router manual or with your network administrator to be sure. You can also search on Google to find out the defaults.
How to connect to the internet on a router?
Connect your modem to the internet port on your router. Usually your router will have one port for the internet connection. This port is usually away from the other ports on the back of the router which are for the devices which will be connecting to the internet. Use a cat5 cable for this connection.
What is the HTTP port for DVR?
HTTP PORT: 88 (You can use port 80 but there are some Internet Service providers which block the use of port 80. I usually just change it to be on the safe side.) DVR Network Settings Menu. Configure Your Browser’s Security Settings In Order To Download the DVR Web Service.
How to port forward a DVR?
Forward the Ports. Find the window or tab that is either called ‘port forwarding’ or ‘apps and gaming’. Go ahead and add a new port forwarding rule. The application name field is where you will put in anything you want that is descriptive to the device you’re port forwarding. In this case you can just put in “DVRWEB” to signify the DVR Web Service connection. External Port can be 88 (or whatever port you set it to on step 2), Internal Port is also set to 88, Protocol will be ‘both’ tcp/udp and the Device IP will be the IP of the DVR. In this case you will make sure it’s ‘192.168.1.110’. Make sure the rule is enabled by checking the box if there is one and save the rule. Then do the same for your TCP And UDP ports that were set on the DVR.You should have:
How to find out what IP address is used for DVR?
Find out your External IP Address. Find the IP address of the network you’re currently setting up the DVR at by typing in “WHAT IS MY IP” into google. You will get your public IP Address and make sure to make a note of it. This is the address that you are going to use in order to connect to your DVR when you are in another location.
How to assign IP address to camera?
Step1: Login Camera on Web Browser > Now Go to Config Tab > Network > Put HTTP Port and Server Port - By default HTTP Port 80 assign (i.e 81 and 6036)> Check mark on use the Following IP Address > Assign IP Address on Camera as given example > Apply.
What port is camera on Internet Explorer?
Note:- By default HTTP Port 80 and Camera always login on Internet Explorer.
Can you use a static IP address for online camera access?
if you have static IP Address. Hope now you are able to online Camera access.
How to set up a DVR for remote viewing?
Below are step by step instructions to setup your DVR or IP Camera for remote viewing. 1.) First Make sure your DVR or IP Camera support remote viewing. 2.) Second you need to obtian the ip address and the port of your DVR or IP camera. Typically you can find this under network within the system menu of your DVR or IP camera.
Can CCTV cameras be emailed?
Although CCTV Camera Pros only can provide phone, email, and online chat based technical support for the DVRs that we supply.
Does CCTV Camera Pros carry AVtech DVRs?
I am sorry but CCTV Camera Pros does not carry AVtech DVRs. If it ends up not working out for you, you may want to check out our iDVR which is one of the best DVRs on the market for remote Internet viewing, including iPhone, Android, and iPad:
