Since, it was not enabled I found the following set of commands in the documentation to enable remote web management of DD-WRT via Telnet. You first have to telnet to your remote router by simply typing telnet 124.xxx.xxx.xx (remote IP). Input your username (usually root) and password (which you had kept when you first configured the router).
Full Answer
How do I access the DD-WRT Web-GUI?
See Telnet/SSH_and_the_Command_Line for more details. After installing DD-WRT Firmware you can access the DD-WRT Web-GUI using a web browser pointing to the same IP address as before you installed DD-WRT.
How to enable remote web management of DD-WRT via telnet?
Since, it was not enabled I found the following set of commands in the documentation to enable remote web management of DD-WRT via Telnet. You first have to telnet to your remote router by simply typing telnet 124.xxx.xxx.xx (remote IP).
Do I need to set my own password for DD-WRT?
The latest versions of DD-WRT will require you to set your own username and password when you first access the web interface. Because the SSH user is always root, it is critical that a strong password be used.
How do I manage the web-GUI?
Under Administration -> Management you can set various details about the Web-GUI. Like: If for some reason you completely lost web access to the router, the web server (HTTP daemon) may be shut down. To regain access try starting the web server. SSH or telnet into the router and enter the following commands:
How do I access my DD-WRT remotely?
Go to Administration -> Management -> Remote Access. Enable the necessary settings for remote Web or SSH access (note the WAN IP and port number), then in your main router forward that port to the WAN IP address of the Repeater.
How do I access DD-WRT interface?
Type "192.168. 1.1" into your Web browser's address bar and press "Enter" to access the Web-based interface. Log in with the user name "root" and the password "admin" to continue. You can use the Web interface to configure your DD-WRT router's settings, including setting a custom user name and/or password.
What is the default username and password for DD-WRT?
<>/? The default username is root and the default password is admin (from v23 SP1). Some earlier versions of DD-WRT did not require a username.
Is open WRT the same as DD-WRT?
OpenWRT is the oldest open-source router firmware project. It's the precursor to both DD-WRT and Tomato, and it has earned its reputation as a powerful choice with a ton of options. OpenWRT, as it is now, is actually a merger of the classic OpenWRT and LEDE.
How do I access DD-WRT Repeater Bridge?
Go to the wireless tab.Choose Repeater Bridge under wireless mode.Match your SSID and channel settings exactly to the main router you will be connecting to.Make sure bridged is selected.Click Save.
How do I find my DD-WRT password?
Both routers have a password of "admin" by default. Click on "support and documentation" in your router's manufacturer's website to find out their default password.
How do you find the IP address of a router?
Find Your Router IP Address on AndroidGo to Settings.Tap Wi-Fi Settings.Tap and hold on your connected network and select Manage Network Settings.Check the box next to Show Advanced Options.Select Static under IP Settings.Your router IP address is listed under the Gateway section.
How do I change my DD-WRT router username and password?
1:023:13How to change DD-WRT Router Username & Password - YouTubeYouTubeStart of suggested clipEnd of suggested clipType in the IP of the root. If you've had it from us it's going to be 192.168. 1.1 and click enter.MoreType in the IP of the root. If you've had it from us it's going to be 192.168. 1.1 and click enter.
Can I install DD-WRT on my router?
DD-WRT can be flashed onto a router in around 10 minutes, using only an Ethernet cable and a few pieces of software. It is possible to “brick” your router during this process, so be sure that you are familiar with how the process works on your router before jumping in.
Is OpenWrt better than DD-WRT?
DD-WRT is a close, close second. It's proven to be a solid choice for custom router firmware, but it lacks in some features, customization, and update availability. OpenWrt is the best choice for most people with modern routers and with the time to sink into learning what exactly they can do with it.
Can I install OpenWrt from DD-WRT?
Check the DD-WRT site to find the most current, stable firmware version compatible with your router hardware in preparation for the install. Access the OpenWRT router command console through SSH to install DD-WRT, and perform the DD-WRT installation via command line, which requires fewer steps and less complexity.
Is OpenWrt better?
OpenWrt incorporates many algorithms from recent research that perform far better than vendor-supplied firmware. OpenWrt is stable, and operates reliably for long periods of time. OpenWrt reduces latency/lag and increased network throughput via bufferbloat control algorithms.
What is the default IP address for DD-WRT?
These are some of the most common default IP addresses: 192.168.1.1 (most commonly used on Linksys and Asus), 192.168.2.1 ( some Belkins), 192.168.11.1 ( some Buffalos), 192.168.10.1 or 192.168.30.1 (some Motorolas), and there may be others.
How many characters are needed for DD-WRT?
Because the SSH user is always root, it is critical that a strong password be used. These passwords should be a minimum of 12 characters and use numbers and valid non-alphabetic characters. 12 characters dramatically reduces the probability of a successful random attack and has a cost / time infeasible computational requirement. Valid special characters are: ~!@#$%^&* ()-_=+ [ {]}|;:,<.>/? see forum thread: [1]
What happens if you lose web access to your router?
If for some reason you completely lost web access to the router, the web server (HTTP daemon) may be shut down. To regain access try starting the web server. SSH or telnet into the router and enter the following commands:
How to connect through secure HTTP?
To connect through secure HTTP, add the option -S at the end of the command. See the httpd man pages for more information about that command.
How to shut down a web server?
To shut down the web server, run the command kill `cat /tmp/var/run/httpd.pid` (note the backquotes) or kill `cat /tmp/var/run/httpsd.pid` if you ran the web server with the option -S to get secure HTTP.
Does DD-WRT count time?
The time will count the time since the router has been powered up, until the router gets WAN access. By default the DD-WRT will automatically try to get the corrent time from a time server.
How to telnet to a remote router?
You first have to telnet to your remote router by simply typing telnet 124.xxx.xxx.xx (remote IP). Input your username (usually root) and password (which you had kept when you first configured the router). After you are through with Telnet, you can now run commands since you are a root user.
How long to wait to access router remotely?
Run the following set of commands one by one in the console. Just wait for 3-5 minutes, while your router reboots and then you can easily access your router remotely via the web browser. However, you should suffix your router’s address with the port no. 8080 as specified in the above command.
primexx
Hi, i just noticed that I can access/login my router's web admin interface by visiting my external IP address from outside my network. i thought i shouldn't be able to do this?
primexx
doesn't work either, that governs remote access (web gui managemnt, ssh, telnet).
eangulus
Disabling Remote HTTP access shouldn't stop internal IP addres's. It should only stop access from the WAN port.
primexx
Disabling Remote HTTP access shouldn't stop internal IP addres's. It should only stop access from the WAN port.
eangulus
Are you sure your accessing it externally? Like your not on a VPN or not still connected to the wireless or something of those lines. I know its a stupid question but I have made some silly mistakes before too.
primexx
yea i've been trying from a web proxy and also my neighbour's open wifi, can access it in both. i don't have vpn.
primexx
ok turns out the firewall rules were all messed up somehow. it's good now.
What happens if you lose web access to your router?
If for some reason you completely lost web access to the router, the web server (HTTP daemon) may be shut down. To regain access try starting the web server. SSH or telnet into the router and enter the following commands:
Can you restart HTTP daemon?
You can try restarting the HTTP daemon since you can still SSH in. If that doesn't work, you may have to resort to a full reset/reboot.
Access Via A Web Browser
- After installing DD-WRT Firmware you can access the DD-WRT Web-GUI using a web browser pointing to the same IP address as before you installed DD-WRT. These are some of the most common default IP addresses: 192.168.1.1 (most commonly used on Linksys and Asus), 192.168.2.1 (some Belkins), 192.168.11.1 (some Buffalos), 192.168.10.1 or 192.168.30.1 (s...
Username and Password
- The latest versions of DD-WRT will require you to set your own username and password when you first access the web interface. Because the SSH user is always root, it is critical that a strong password be used. These passwords should be a minimum of 12 characters and use numbers and valid non-alphabetic characters.12 characters dramatically reduces the probability of a succ…
Elements of The Web-Gui
- The Web-GUI has five main elements 1. 1.The tabbed menu system 2. 2.Main area 3. 3.Action buttons 4. 4.Help information 5. 5.Some system essentials Clicking these text buttons gives you access to furter information 1. 1.More... (More Help) 2. 2.Firmware details Some notes about the screen elements. 1. The default information screen is the same as menu selection: Status->Sys-I…
Menu Interface Map
- Select one of the menu points below for information about settings within that menu page. (Menu structure as of June 2012 - svn19342 Mega). 1. Setup 1.1. Basic Setup 1.2. DDNS 1.3. MAC Address Clone 1.4. Advanced Routing 1.5. VLANs 1.6. Networking 1.7. EoIP Tunnel 2. Wireless 2.1. Basic Settings 2.2. Radius 2.3. Wireless Security 2.4. MAC Filter 2.5. Advanced Settings 2.6. …
Setting Details About The Web-Gui
- Under Administration -> Managementyou can set various details about the Web-GUI. Like: 1. set Username and Password 2. control Access to the Web-GUI locally/remotely and more 3. select between different Router GUI styles [[Image:
Regaining Access
- [edit] Locally
If for some reason you completely lost web access to the router, the web server (HTTP daemon) may be shut down. To regain access try starting the web server. SSH or telnetinto the router and enter the following commands: To connect through secure HTTP, add the option -Sat the end of … - [edit] Remotely
Method 1: See Enable Web Interface Over SSH? Method 2: If you're at a remote location and have access to your router through SSH or telnet, but you'd like to enable remote web access, you may use the following command to allow access from one remote IP address: 1. 1.1. iptables -I INPU…
Simulation
- (This section has not been updated for quite some time). A setup simulation of V22-DD-WRT interface is here. A setup simulation of V23-DD-WRT interface is here. A setup simulation of V24beta-DD-WRT interface is here.