Manage remote access to stores through NetScaler Gateway
- On the Windows Start screen or Apps screen, locate and click the Citrix StoreFront tile.
- Select the Stores node in the left pane of the Citrix StoreFront management console and, in the results pane, select a...
- In the Configure Remote Access Settings dialog box, specify whether and how users connecting from public...
Full Answer
How do I configure Citrix storefront settings in PowerShell?
Manage this feature by using the StoreFront console or PowerShell. On the Windows Start screen or Apps screen, locate and click the Citrix StoreFront tile. Select the Stores node in the left pane of the Citrix StoreFront management console and, in the Actions pane, click Configure Store Settings.
How do I configure NetScaler gateway to work with Citrix storefront?
Select the Stores node in the left pane of the Citrix StoreFront management console and, in the results pane, select a store. In the Actions pane, click Configure Remote Access Settings. In the Configure Remote Access Settings dialog box, specify whether and how users connecting from public networks can access the store through NetScaler Gateway.
How do I enable session reconnect in Citrix storefront?
On the Windows Start screen or Apps screen, locate and click the Citrix StoreFront tile. Select the Stores node in the left pane of the Citrix StoreFront management console and, in the Actions pane, click Configure Store Settings. Select Advanced Settings and check or uncheck Allow session reconnect.
How do I enable trusted domain authentication in Citrix storefront?
Select the Stores node in the left pane of the Citrix StoreFront management console and, in the results pane, select the appropriate authentication method. In the Actions pane, click Manage Authentication Methods. From the User name and password > Settings list, select Configure Trusted Domains.
Why do you include the geographical location in Citrix?
What is Storefront authentication?
What is the subnet address for NetScaler Gateway?
How to make a NetScaler store unavailable?
Why does Storefront request tickets from two different STAs?
When is NetScaler Gateway authentication enabled?
Where is the Stores node in Citrix?
See 4 more
About this website
How do I enable remote access to StoreFront?
On the Windows Start screen or Apps screen, locate and click the Citrix StoreFront tile. Select the Stores node in the right pane of the Citrix StoreFront management console and, in the results pane, select a store. In the Actions pane, click Configure Remote Access Settings.
How do I access Citrix remotely?
If a new Citrix Virtual Apps and Desktops site was created for Remote PC Access:Select the Remote PC Access Site type.On the Power Management page, choose to enable or disable power management for the default Remote PC Access machine catalog. ... Complete the information on the Users and Machine Accounts pages.
Where is my Citrix StoreFront URL?
The XenApp Services URL for a store has the form http[s]://serveraddress/Citrix/storename/PNAgent/config. xml, where serveraddress is the fully qualified domain name of the server or load balancing environment for your StoreFront deployment and storename is the name specified for the store when it was created.
How do I get to advanced settings in Citrix?
Right-click the Citrix Workspace icon in the Windows system tray and select Advanced Preferences > Reset Citrix Workspace. Enter the Workspace URL into the browser and sign in.
How do I access remote desktop connection?
On your local Windows PC: In the search box on the taskbar, type Remote Desktop Connection, and then select Remote Desktop Connection. In Remote Desktop Connection, type the name of the PC you want to connect to (from Step 1), and then select Connect.
What is remote network access?
Remote access is the act of connecting to IT services, applications, or data from a location other than headquarters. This connection allows users to access a network or computer remotely via the internet.
What is the difference between Citrix Web Interface and StoreFront?
Web Interface displays the available resources. StoreFront sends the list of available resources including the existing subscriptions to the Citrix Receiver installed locally or displays them in Receiver for Web.
How do I change the server base URL from http to https on Citrix StoreFront?
InstructionsGo to StoreFront and click Server Group on the left panel.Click Change Base URL on the right panel.Type the base URL and click OK.
How do I change Citrix StoreFront from http to https?
In the Citrix StoreFront console, right-click Server Group and click Change Base URL. Enter the new Base URL in https://citrix.corp.com format. This must be https.
How do I customize my Citrix StoreFront?
On a Windows system you can press Shift + F7.Optional. Go to the Style. css on the lower left hand corner, and add the changes you want to make there. ... Once you finish your testing, backup and modify the actual C:\inetpub\wwwroot\Citrix\
How do I change settings in Citrix?
On the Windows Start screen or Apps screen, locate and click the Citrix StoreFront tile. Select the Stores node in the left pane and in the Actions pane, click Manage Receiver for Web Sites, click Configure, choose Session Settings.
Where is the Citrix Connection Manager located?
ica files with the Citrix Connection Manager. This file by default is located in C:\Program Files (x86)\Citrix\ICA Client\wfcrun32.exe.
How do I connect to a Citrix virtual machine?
On the Citrix Virtual Desktops Controller page, select the type the Delivery Controller. If you select Citrix Cloud, enter Citrix Cloud Credentials when prompted, and select the cloud customer if requested.
What is Citrix RDP?
RDP Access – Remote Desktop – lets you connect to your UIHC workstation from a different computer, and operate it as if you were sitting right in front of it. RDP access must be requested through the Enterprise Service Center Service Catalog.
Manage remote access to stores through Citrix Gateway
Use the Remote Access Settings task to configure access to stores through Citrix Gateway for users connecting from public networks. Remote access through a Citrix Gateway cannot be applied to unauthenticated stores.
NetScaler Gateway
SECURITY INFORMATION. Whenever you download a file over the Internet, there is always a risk that it will contain a security threat (a virus or a program that can damage your computer and the data stored on it).
Using SafeNet Gridsure 2FA to Access NetScaler for Remote Access
We would like to show you a description here but the site won’t allow us.
NetScaler Gateway
SECURITY INFORMATION. Whenever you download a file over the Internet, there is always a risk that it will contain a security threat (a virus or a program that can damage your computer and the data stored on it).
NetScaler Gateway (free version) download for PC
Download NetScaler Gateway for free. NetScaler Gateway - NetScaler Unified Gateway consolidates remote access infrastructure to provide single sign-on...
Why do you include the geographical location in Citrix?
For example, you can include the geographical location in the display names for your NetScaler Gateway deployments so that users can easily identify the most convenient deployment for their location.
What is Storefront authentication?
StoreFront uses the authentication service to authenticate remote users so that they do not need to re-enter their credentials when accessing stores.
What is the subnet address for NetScaler Gateway?
The subnet address is the IP address that NetScaler Gateway uses to represent the user device when communicating with servers on the internal network.
How to make a NetScaler store unavailable?
To make the store unavailable to users on public networks, make sure you do not check Enable remote access. Only local users on the internal network will be able to access the store. To enable remote access, check Enable Remote Access . To make only resources delivered through the store available through NetScaler Gateway, select No VPN tunnel.
Why does Storefront request tickets from two different STAs?
When the Request tickets from two STAs, where available check box is selected, StoreFront obtains session tickets from two different STAs so that user sessions are not interrupted if one STA becomes unavailable during the course of the session. If, for any reason, StoreFront is unable to contact two STAs, it falls back to using a single STA.
When is NetScaler Gateway authentication enabled?
If it is not already enabled, the pass-through from NetScaler Gateway authentication method is automatically enabled when you configure remote access to the store. Users authenticate to NetScaler Gateway and are automatically logged on when they access their stores.
Where is the Stores node in Citrix?
Select the Stores node in the left pane of the Citrix StoreFront management console and, in the results pane, select a store. In the Actions pane, click Configure Remote Access Settings.
Where is the Stores node in Citrix?
Select the Stores node in the left pane of the Citrix StoreFront management console and, in the results pane, select a store. In the Actions pane, click Configure XenApp Services Support.
How to turn off user subscriptions in Citrix?
In the Actions pane, click Configure Store Settings > User Subscriptions to toggle the user subscriptions feature off or on.
What command turns Workspace control reconnect on or off?
Then the PowerShell command Set-DSAllowSessionReconnect turns Workspace control reconnect on or off.
What is Stop the Subscriptions Store service on servers StorefrontB and C?
This action prevents the servers from sending or receiving subscription data during the update of StoreFrontA.
Can you use both Citrix and PowerShell at the same time?
Do not use both methods at the same time. Always close the StoreFront management console before using PowerShell to change your StoreFront configuration. Citrix also recommends that you take a backup of your existing subscription data before making changes so that rollback to a previous state is possible.
How to restore Storefronta subscriptions?
Restore the data on StoreFrontA using the Restore-STFStoreSubscriptions cmdlet. It is not necessary to stop the Subscriptions Store service, or to purge the subscription data on StoreFrontA (it is overwritten during the restore operation).
Can you use Citrix Storefront on multiple servers?
In multiple server deployments, use only one server at a time to change the configuration of the server group. Ensure that the Citrix StoreFront management console is not running on any of the other servers in the deployment. Once complete, propagate your configuration changes to the server group so that the other servers in the deployment are updated.
How to manage Citrix Gateways?
In the StoreFront Console, in the middle, right-click your Store, and click Manage Authentication Methods. Ensure Pass-through from Citrix Gateway is selected, and click OK. In the StoreFront Console, right-click the Stores node, and click Manage Citrix Gateways.
How many servers can Citrix support?
Citrix provides scaling guidance for up to 6 servers in a single StoreFront Server Group.
What is the version of Storefront 1912?
This article applies to StoreFront versions 1912 LTSR CU3, 1909, 3.16, 3.12.8000, and all other versions 3.5 and newer. There is no version of StoreFront newer than 1912 CU3.
Does Citrix require a PIN?
The Citrix Gateway Virtual Server requires user certificates. If ICA traffic goes through a Citrix Gateway Virtual Server that requires user certificates (e.g. Smart Card), then each session launch will result in a PIN prompt. To prevent these extra prompts, build a separate Citrix Gateway Virtual Server that doesn’t have user certificates as Mandatory. Use Optimal Gateway to force ICA connections through the other Citrix Gateway Virtual Server. Note: SmartAccess Callback URL also cannot use a Citrix Gateway Virtual Server where client certificates are set to Mandatory, so the extra Citrix Gateway Virtual Server would be useful for that scenario too.
Can Citrix Gateway be used for internal connections?
Citrix Gateway for internal connections (AppFlow). If you want to force internal ICA connections to go through Citrix Gateway so AppFlow data can be sent to Citrix Application Delivery Management (ADM), then you can do that using HDX Optimal Gateway, even if the user originally connected directly to the StoreFront server. See CTX200129 How to Force Connections through NetScaler Gateway Using Optimal Gateways Feature of StoreFront for more information.
Does Citrix use Storefront?
When the active StoreFront is down, Citrix Gateway will use StoreFront in the remote datacenter. However, the remote datacenter has its own Citrix Gateway, thus there will be two different Citrix Gateways connecting to one StoreFront Server Group. If you use SmartAccess or SAML and need the Callback URL, then you’ll need a special StoreFront configuration to handle the Callback URL from multiple Gateway appliances.
Can you define separate FQDNs for Citrix?
You can either define separate FQDNs for StoreFront Load Balancing (internal) and Citrix Gateway (external). Or, you can define a Single FQDN for both.
How to change default tab in Citrix?
You can change the default tab to something other than Favorites by editing C:inetpubwwwrootCitrixStoreWebweb.config in an elevated text editor.
How to add a server to Storefront?
Login to the first StoreFront server. In the StoreFront management console, right-click Server Group, and click Add Server.
How to remove authentication method Citrix?
In the Citrix StoreFront console, on the left, right-click Authentication and click Add/Remove Methods.
What is the Storefront base URL?
The StoreFront Base URL should point to a URL with a FQDN that resolves to a load balancing VIP that load balances the StoreFront servers. Receiver uses this Base URL to connect to StoreFront. If remote, Receiver will first connect to NetScaler Gateway and then use Gateway to proxy a connection to the Base URL.
How to propagate changes in Storefront?
In the StoreFront console, on the left, right-click Server Group and click Propagate Changes. You might see a message saying that you made changes on the wrong server.
How to remove storefront?
In the StoreFront console, on the left click Stores. Highlight the store and on the bottom right click Remove Store. Click Remove. On the left, right-click Stores and click Create Store. In the Store Name page, enter a name. This name becomes part of the path (/Citrix/StoreName) and is displayed in Receiver.
Where is the Receiver for Web in Storefront?
In the StoreFront console, on the left, click Receiver for Web.
Why do you include the geographical location in Citrix?
For example, you can include the geographical location in the display names for your NetScaler Gateway deployments so that users can easily identify the most convenient deployment for their location.
How to remove NetScaler deployment from Storefront?
In the Actions pane, use the Remove task from Manage NetScaler Gateways to delete the details of a NetScaler Gateway deployment from StoreFront. Once a NetScaler Gateway deployment is removed, users are no longer be able to access stores through that deployment.
What is the subnet address for NetScaler Gateway?
The subnet address is the IP address that NetScaler Gateway uses to represent the user device when communicating with servers on the internal network.
Where is the Stores node in Citrix?
Select the Stores node in the left pane of the Citrix StoreFront management console and, in the results pane, select a NetScaler Gateway deployment. In the Actions pane, click Manage NetScaler Gateways.
Can you export Citrix provisioning file?
Otherwise, you can export a provisioning file for the store and make this file available to your users.
Is Citrix translated?
The official version of this content is in English. Some of the Citrix documentation content is machine translated for your convenience only. Citrix has no control over machine-translated content, which may contain errors, inaccuracies or unsuitable language. No warranty of any kind, either expressed or implied, is made as to the accuracy, reliability, suitability, or correctness of any translations made from the English original into any other language, or that your Citrix product or service conforms to any machine translated content, and any warranty provided under the applicable end user license agreement or terms of service, or any other agreement with Citrix, that the product or service conforms with any documentation shall not apply to the extent that such documentation has been machine translated. Citrix will not be held responsible for any damage or issues that may arise from using machine-translated content.
Can Citrix Storefront be used on multiple servers?
Ensure that the Citrix StoreFront management console is not running on any of the other servers in the deployment. Once complete, propagate your configuration changes to the server group so that the other servers in the deployment are updated.
Why do you include the geographical location in Citrix?
For example, you can include the geographical location in the display names for your NetScaler Gateway deployments so that users can easily identify the most convenient deployment for their location.
What is Storefront authentication?
StoreFront uses the authentication service to authenticate remote users so that they do not need to re-enter their credentials when accessing stores.
What is the subnet address for NetScaler Gateway?
The subnet address is the IP address that NetScaler Gateway uses to represent the user device when communicating with servers on the internal network.
How to make a NetScaler store unavailable?
To make the store unavailable to users on public networks, make sure you do not check Enable remote access. Only local users on the internal network will be able to access the store. To enable remote access, check Enable Remote Access . To make only resources delivered through the store available through NetScaler Gateway, select No VPN tunnel.
Why does Storefront request tickets from two different STAs?
When the Request tickets from two STAs, where available check box is selected, StoreFront obtains session tickets from two different STAs so that user sessions are not interrupted if one STA becomes unavailable during the course of the session. If, for any reason, StoreFront is unable to contact two STAs, it falls back to using a single STA.
When is NetScaler Gateway authentication enabled?
If it is not already enabled, the pass-through from NetScaler Gateway authentication method is automatically enabled when you configure remote access to the store. Users authenticate to NetScaler Gateway and are automatically logged on when they access their stores.
Where is the Stores node in Citrix?
Select the Stores node in the left pane of the Citrix StoreFront management console and, in the results pane, select a store. In the Actions pane, click Configure Remote Access Settings.