Remote-access Guide

buffalo nas remote access

by Lucile Howe Published 2 years ago Updated 2 years ago
image

6Configure each setting as below.
  1. Select. Enable. for. Web Access Service. .
  2. Select. Enable. for. Use BuffaloNAS.com. .
  3. Enter a desired name into. BuffaloNAS.com Name. . Take note of this BuffaloNAS.com name. This will be used to open a shared folder from a remote location. ...
  4. Select. Enable. for. Auto-Configure Firewall (UPnP) . ...
  5. Click.

How do I connect to Buffalo LinkStation?

Plug in the AC adapter and connect to the LinkStation. Power on the LinkStation by moving the switch on the rear of the unit to “On”. The power LED should begin blinking white. Once the LED is solid white the LinkStation is booted and ready to be configured.

How do I access my Buffalo NAS via FTP?

In settings click on the “FTP” icon under “Services”. Click the checkbox to enable the FTP service. You can adjust the TCP port used by FTP as well as the maximum number of clients and clients per host. Once you have the options set as desired click the “Apply” button to save changes.

How do I find the IP address of a Buffalo NAS?

Click on Start > Program Files > Client Utiltiy. This will scan the network for NAS devices and supply you with an IP address. If that fails, press the INIT button on your device (click here to refer to the Answer), which will reset the IP address to DHCP. Use the Client Utility again to find the IP address.

What port does Buffalo LinkStation use?

The Buffalo NAS Drive runs this Web access feature on TCP Port 9000. Since your NAS drive is on private ip address, you cannot access it over the Internet. For it to be accessible over the Internet, you must access it over your public ip address.

What is the admin password for Buffalo NAS?

passwordIf NAS Navigator is not installed, download and install the application by clicking on the provided URLs here: Windows or Mac. Log in to Settings. The default username and password are "admin" and "password".

How do I log into my Buffalo router?

Buffalo Router LoginConnect router cable to your Laptop or Computer. Alternatively use your wireless network. ... Open your web browser of choice and type IP address of your Buffalo router in the address bar. ... Now enter the default username and password of your router by accessing the admin panel.

What is the default IP address for a Buffalo router?

If Router LED is off or no router LED, the AirStation is in Bridge Mode and the default IP is 192.168. 11.100.

How do I connect to LinkStation?

Connect the LinkStation to your network with an Ethernet cable and power it on. Launch a web browser and enter the LinkStation's IP address into the address bar to access Settings. If you do not know the LinkStation's IP address, you can use NAS Navigator to access Settings instead.

How do I get to Buffalo TeraStation?

Log in to Settings for the TeraStation. You can access Settings by either entering the TeraStation's IP address into a web browser window or by using NAS Navigator. Navigate to the "File Sharing" tab and click the Folder Setup widget button to view all shared folders.

What is BuffaloNAS com key?

BuffaloNAS.com Key This is the password (“key”) that protects your LinkStation's or TeraStation's BuffaloNAS.com name. Try to select a password that is not easily guessed by others.

How do I change the IP address on a Buffalo NAS?

NAS Navigator2 will start....Alternatively, changing the IP address from Settings:For a PC, double-click the icon. ... For a PC, right-click on the icon, then select [Settings]. ... Enter the username and password, then click [Login].Navigate to [Network] – [Settings] – [IP Address Settings], then click [Modify Settings].

How do I set a static IP on a Buffalo NAS?

To set a static IP address, click the radio button to disable DHCP and then type in the IP address and subnet mask. You can also set the frame size, although in most cases it should be left at the default. Once you have the settings configured correctly, click OK. You will be asked to go to the new IP address.

How do I reset my Buffalo NAS?

Initializing from SettingsIn Settings, navigate to [System] - [Restore/Erase].Click [Restore LinkStation].The "Confirm Operation" screen will open. Enter the displayed number within 60 seconds, then click [Apply].

How do I set up Buffalo TeraStation?

Setup your Buffalo NAS out of the boxConnect the TeraStation / LinkStation to your network using the supplied Ethernet cable. ... Plug in the Power cable / AC adapter and connect to the TeraStation / LinkStation.Power on the TeraStation / LinkStation by pressing the Power button, or by moving the power switch to “ON”.More items...

Why is it important to have a NAS?

Having a NAS to act as a private cloud drive effects multi-layer data security, which is critical if you are serious about protecting your personal data from escalating cyberthreats such as ransomware. You can easily back up multiple PC and Mac computers (and even mobile devices) to the same secure location, as well as offset your cloud storage to keep your data safe as you see fit.

What is a linkstation 700?

The LinkStation 700 personal NAS offers security benefits for those who want to take their file storage and backups to the next level. The LinkStation 700 runs on a closed system, with not even the system administrator having root rights. This means that not third-party apps can be installed onto the NAS, eliminating a possible vector for malware, spyware, and other viruses. The drives are also encrypted with 256 AES encryption, and offers RAID for out-of-the-box data redundancy.

Do you have to pay monthly for Linkstation?

Unlike cloud storage, once you purchase the LinkStation, it’s yours and you can control how to store and back up data as you see fit—no need to pay monthly fees or deal with convoluted pricing structures. This versatility of a personal NAS allows it to be used in any situation you set it up in, while being able to access it at any time, from anywhere.

What is remote management service?

Remote Management Service allows you to access your Buffalo network devices from an external network and monitor them remotely, as well as consolidate users and devices into groups so devices can be better managed depending on the organization structure.

How to generate device registration key?

1. From the Remote Management Service console, click Device Registration Keys. 2. Click Generate at the upper-right corner of the window. 3. Enter the expiration date and select the device group that the device will belong to, as well as the number of device registration keys you would like to generate.

How to set up Terastation webUI?

From Settings, click Remote Management Service.#N#3. Click Next.#N#4. Enter the hostname of the device and a brief description of its location, then click Next.

How to create a group in Remote Management Service?

1. From the Remote Management Service console, click Users. 2. Click Create at the upper-right corner of the window. 3. Enter the desired user ID, username, and email address. Select the user group that the user will join and the user type: Click “Search” on the User Group, then click the grey “Search” icon again.

Does Buffalo create an MSP end user?

Each new MSP/End User account must be created by Buffalo. When created the system will generate an email to the MSP/End User’s registered email address with a system generated password.

What is Buffalonas.com?

Note: Buffalonas.com is a DNS service provided by Buffalo. If you wish to use another DNS service select the option to disable buffalonas.com registration.

How to enable web access on a linkstation?

In order to enable WebAccess on a LinkStation, it is necessary to allow limited communication from the Internet through the firewall to the LinkStation. This is done by opening a port (a kind of virtual door) on the firewall for this specific service. The "door" will have a specific label known as a "port number" on the outside, or Internet side, and a different label (port number) on the inside (internal network side). The device that contains the firewall, usually a wireless router or ISP (Internet Service Provider) supplied modem/gateway will need to have specific instructions on how to handle this virtual door. Those instructions are called "port forwarding".

Why is WebAccess needed on a Linkstation?

In order to enable WebAccess on a LinkStation, it is necessary to allow limited communication from the Internet through the firewall to the LinkStation.

How to access settings on Linkstation?

Launch a web browser and enter the LinkStation's IP address into the address bar to access Settings. If you do not know the LinkStation's IP address, you can use NAS Navigator to access Settings instead. Click on the "Advanced Settings" tile. You will be asked to log in.

Why use static IP address on linkstation?

It is recommended to use a static IP address on the LinkStation when using WebAccess to prevent loss of access due to a change in the IP address of the LinkStation. For instructions on setting a static IP address on a LinkStation see here.

How to connect a Terastation to a Linkstation?

2. Plug in the Power cable / AC adapter and connect to the TeraStation / LinkStation. 3. Power on the TeraStation / LinkStation by pressing the Power button, or by moving the power switch to “ON”. 4. The power LED should start blinking.

How to secure a home office?

Learn the top 5 ways to secure and backup your home office here. 1. Connect the TeraStation / LinkStation to your network using the supplied Ethernet cable. Make sure your network has a DHCP server to assign an IP address to the NAS. For a home environment it can usually be your Wi-Fi router. 2.

Is Share on NAS mapped to Windows?

2. The Share on the NAS is now mapped to the Windows network drive and ready to use.

How to open Buffalo WebAccess?

Locate WebAccess. Open My Computer on Windows Explorer and look for the Buffalo WebAccess icon. It’s a red house with green and blue arrows. Double-click on it to open.

How to view shared folders in NAS?

Open NAS. Double-click on the NAS directory to view all the shared folders and files.

Do you have to link a NAS to your computer?

Before you’re able to access your files and folders in your NAS, you have to properly link the device to your computer. The NAS should have a proper name, and WebAccess should be enabled.

How to disable Buffalonas.com?

1. Open the user interface for the TeraStation. Click on the configuration icon next to WebAccess. Click Edit to configure the options. Note: Buffalonas.com is a DNS service provided by Buffalo. If you wish to use another DNS service select the option to disable buffalonas.com registration.

How to enable web access on a terastation?

In order to enable WebAccess on a TeraStation, it is necessary to allow limited communication from the Internet through the firewall to the TeraStation. This is done by opening a port (a kind of virtual door) on the firewall for this specific service . The "door" will have a specific label known as a "port number" on the outside, or Internet side, and a different label (port number) on the inside (internal network side). The device that contains the firewall, usually a wireless router or ISP (Internet Service Provider) supplied modem/gateway will need to have specific instructions on how to handle this virtual door. Those instructions are called "port forwarding".

Why use static IP address on terastation?

It is recommended to use a static IP address on the TeraStation when using WebAccess to prevent loss of access due to a change in the IP address of the TeraStation. For instructions on setting a static IP address on a TeraStation see here.

image
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9