bgw210-700 remote access

What is the bgw210-700 broadband gateway?

ARRIS BGW210-700 Broadband Gateway Introduction The BGW210-700 Broadband Gateway hardware platform can host different software. The Advanced Residential Gateway supports VoIP, IPv6, video delivery, security firewall, and extensive remote management features.

What does off mean on the bgw210-700?

Off = The BGW210-700 Broadband Gateway is not powered or no powered devices are connected to the associated ports. Power Jack (Rear Panel) Green = The voltage present at the DC input connector is equal to or above the required minimum specification of 11.4 volts.

How do I replace the power supply or cord on bgw210-700?

If the power supply or cord becomes damaged or needs to be replaced, to obtain an authorized replacement please contact AT&T customer service by phone (1.800.288.2020) or via website (www.att.com/support). The first computer you connect can be used to configure the BGW210-700 Broadband Gateway settings.

How do I connect two phones to the bgw210-700?

For two phones, connect the phone cable to a splitter and then to the phones. Note: To prevent interference with cordless phones, ensure that the BGW210-700 Broadband Gateway is at least 5 feet (1.5 m) from any cordless phone base station.

How do I access my BGW210 modem?

Type 192.168. 15.1 (the default IP to access the admin interface) in the address bar of your internet browser to access the router's web-based user interface. You should see 2 text fields where you can enter a username and a password. The default username for your Arris BGW210-700 ATT is (blank).

What is ATT remote access?

AT&T Secure Remote Access allows administrators to grant access to specific applications by role or user without connecting to the network, helping to reduce risk of DDoS attacks or malware spread.

How do I disable AT&T router remotely?

access to your 2Wire gateway and home network. To disable Web Remote Access, uncheck the box. Change Password. To change your Web Remote Access password, enter and confirm your new password.

How do I access my AT&T fiber router?

Enter http://192.168.1.254 into a browser URL bar. Once there, you have access to the following gateway and network features: Gateway User Interface for Wi-Fi gateways. Change your Device or System Access Code.

Is remote access secure?

Remote access solutions could leave you vulnerable. If you don't have proper security solutions in place, remote connections could act as a gateway for cybercriminals to access your devices and data. Hackers could use remote desktop protocol (RDP) to remotely access Windows computers in particular.

Which is a more secure form of remote access over a network?

Virtual private network (VPN)Virtual private network (VPN) – The most common and well-known form of secure remote access, VPNs typically use the public Internet to connect to a private network resource through an encrypted tunnel.

Can someone access my router remotely?

Can a Wi‑Fi router be hacked? It's entirely possible that your router might have been hacked and you don't even know it. By using a technique called DNS (Domain Name Server) hijacking, hackers can breach the security of your home Wi‑Fi and potentially cause you a great deal of harm.

Can my router be accessed remotely?

To connect to your personal router remotely, go to your web browser on your phone. Type in your router's IP address. It's the same IP address you used when you were setting up the remote access. A log-in page will be displayed.

Can someone else access my router?

Once a network has been discovered, anyone can attempt to login to it, even if it's password protected. That said, most WiFi router passwords can be cracked using another set of tools, regardless of which network security protocol you're using.

What is IP passthrough AT&T?

IP Passthrough means the AT&T supported CPE device terminates the DSL, authenticates with the network (Receives a WAN IP) and shares that IP address with a single device connected to the AT&T supported CPE equipment.

How do I access my router from my phone?

You can also access the router's settings on your phone from a mobile web browser:Make sure your phone is connected to your router's wireless network.Identify your router's default gateway IP address. ... Find your router's user name and password. ... Open a mobile browser and enter the router's IP address in the URL bar.More items...•

How do I put BGW210 in bridge mode?

Configuration steps to perform on the BGW210-700:Login to the BGW210-700's web-based configuration interface in your web browser using the link: https://192.168.1.254.Go to the "Home Network" tab -> "Wi-Fi" tab.Set Home SSID Enable to "Off"Set Guest SSID Enable to "Off"Set 2.4 GHz Wi-Fi operation to "Off"More items...•

What does AT&T remote Support do?

AT&T Remote Support is a remote support app that enables you to securely share your screen with customer support agents in real-time. To launch a remote session, simply download the app and enter the 4-digit pin provided by the support rep.

What are potential risks associated with remote access?

Five Remote Access Security Risks And How To Protect Against ThemWeak remote access policies. ... A deluge of new devices to protect. ... Lack of visibility into remote user activity. ... Users mixing home and business passwords. ... Opportunistic phishing attempts.

What is remote connectivity?

Remote access is the act of connecting to IT services, applications, or data from a location other than headquarters. This connection allows users to access a network or computer remotely via the internet.

What is remote VPN?

A remote access virtual private network (VPN) enables users who are working remotely to securely access and use applications and data that reside in the corporate data center and headquarters, encrypting all traffic the users send and receive.

What does the green light on my Ethernet gateway mean?

After the gateway recognizes the computer, the Ethernet light turns steady green and blinks when the computer starts transferring data with the gateway. See Status Indicator Lights (page 17) under Basic Troubleshooting for all Ethernet light indications.

What is the ARRIS BGW210-700?

This hardware install and operation guide consists of six product information chapters presented as follows:#N#1. ARRIS BGW210-700 Broad band Gateway Introduction (page 5) — Describes the ARRIS® document suite, purpose, and structure of this guide .#N#2. Preliminary Safety Instructions (page 7) — Provides power supply, telecommunication, and ventilation safety instructions.#N#3. Hardware Gateway Installation (page 9) — Provides the rear panel illustration, a cabling overview, and procedures to perform BGW210-700 Broadband Gateway connections for the power adapter, wired Ethernet, wireless devices, Internet, and VoIP telephones.#N#4. Basic Troubleshooting (page 16) — Provides simple suggestions for troubleshooting problems with the initial configuration of the gateway.#N#5. Technical Specifications (page 25) — Presents system and device specifications and important compliance and safety statements.#N#6. Important Safety Instructions (page 27) — Provides product, telecommunication, and electrical cautionary information, as well as conformance, radiation, and gateway disposable information

How to connect a BGW210-700 to a power supply?

The power adapter supplies power to the BGW210-700 Broadband Gateway.#N#1. Connect the appropriate end of the power adapter cable to the BGW210-700 Broadband Gateway rear panel POWER port.#N#2. Connect the power plug end to the electrical outlet.#N#After the BGW210-700 Broadband Gateway is powered on, the power light blinks green momentarily and then remains steady green.#N#For all power light indications, see Status Indicator Lights (page 17) under Basic Troubleshooting.#N#Warning: Use only the power supply and cord that came with the BGW210-700 Broadband Gateway. Failure to use the authorized power supply and cord may cause electric shock, fire, bodily injury, and/or property damage. If the power supply or cord becomes damaged or needs to be replaced, to obtain an authorized replacement please contact AT&T customer service by phone (1.800.288.2020) or via website (www.att.com/support).

How many Ethernet ports does a BGW210-700 have?

The BGW210-700 Broadband Gateway has four wired Ethernet ports that can be used to connect computers or other devices. As shown in the illustration below, to connect a computer to the BGW210-700 Broadband Gateway: 1. Connect one end of the Ethernet cable to one of the Ethernet ports on the BGW210-700 Broadband Gateway.

How far away is the BGW210-700?

Note: To prevent interference with cordless phones, ensure that the BGW210-700 Broadband Gateway is at least 5 feet (1.5 m) from any cordless phone base station. After the gateway recognizes the phones (Line 1 and Line 2), the Phone 1 & Phone 2 lights turn steady green and blink when the associated phone is in use.

What happens if you don't use the power cord on a BGW210-700?

Failure to use the authorized power supply and cord may cause electric shock, fire, bodily injury, and/or property damage.

What precautions should be taken when using a telephone?

When using telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and injury, including the following:#N#1. This device is intended for indoor use only.#N#Warning: Do not install this gateway outdoors.#N#Warning: Installing and operating this gateway outdoors is a violation of FCC rules.#N#2. Do not use this product near water, for example, near a bathtub, washbowl, and kitchen sink or laundry tub, in a wet basement or near a swimming pool.#N#3. Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk of electrical shock from lightning.#N#4. Do not use the telephone to report a gas leak in the vicinity of the leak.#N#Caution: The external phone should be UL listed, and the connections should be made in accordance with Article 800 of the National Electric Code (NEC).#N#Caution: To reduce the risk of fire, use only No. 26 AWG or larger telecommunication line Cord.

PleX is AMAZING! And non-techie folks just don't appreciate how great it is

I just recently set up a Plex server at home. I had a bunch of movies on hard drive but I'd have to sort through it all manually to watch anything, and only on my PC anyway.

Plex on iOS is getting gradually more broken as time goes on

subtitles on downloaded media don’t turn on. This has been like this for months for the downloaded media library. It’s fine for the normal online library.

Watch out for new Notifications

I updated the Plex app on my phone (Android) today, and I was looking through the the settings for something regarding the new Downloads feature when I noticed there are new Notification preferences that were not there last time I looked.

What to do if you can't log in to your arris router?

If you are unable to log in even after trying the above list of passwords you may need to consider a reset for your router. Our guide How to Reset a Router can help you with that. After resetting the Arris BGW210-700 router your username and password will be reverted back to factory defaults.

What is a BGW210-700 router?

Sometimes you need to unblock some of these connections so you can run a game or application. This is called opening a port or port forwarding . Port forwarding is literally forwarding a port from the Internet to your home network.

How to open ports on arris router?

You need to follow the steps below to open ports in your Arris BGW210-700 router: Set up a static IP address on the computer or device that you are forwarding ports to. Go ahead and access your Arris BGW210-700 router. Find the Port Forwarding section in your Arris BGW210-700 router.

Why is it important to set up a static IP address in the device that you are forwarding a port to?

This ensures that your ports remain forwarded even after a reboot, power outage, or other type of device or router disconnect.

How to check if my router is working?

Enter your router's IP address into the address bar of your browser and click the enter button on your keyboard. You should now be on a page called Status.

Why do we create network utilities?

We think that forwarding a port should be easy. That's why we created Network Utilities. Our software does everything that you need to forward a port.

Where is the address bar on a computer?

Once you have opened up a browser window, find the address bar. This is usually at the top of the page like the image below shows.

How many lines does a BGW210-700 support?

Note: The BGW210-700 Broadband Gateway supports two VoIP lines over one RJ14 (FXS) VoIP port. To connect two phone lines, an inner and outer pair splitter adapter must be attached to the RJ14 (FXS) VoIP port to terminate both lines.

What is a USB1 and USB2?

USB1 and USB2 Universal Serial Bus connections 1 and 2 for US B devices. Ethernet 1,2,3,4 Provide connection for up to four Ethernet devices, such as PCs and other devices. ONT The Optical Network Terminal fiber optic connector. Broadband An alternate DSL connection to the Internet; its implementation is determined by the service configuration from the provider. Phone Lines 1 and 2 Provides connection for up to two VoIP phones. A voice line splitter is required when connecting two phones. Reset Used to reboot the gateway or perform a factory default restore if depressed for 10 seconds or longer. Power Used to power the gateway on/off.

What does the green light on my Ethernet switch mean?

After the gateway recognizes the computer, the Ethernet light turns steady green and blinks when the computer starts transferring data with the gateway. See Status Indicator Lights

What is a malfunction on a BGW210-700?

Note: A malfunction is defined as any error of internal sequence or state (not network connectivity) that prevents the BGW210-700 Broadband Gateway from connecting to the broadband network or passing data. This may be identified at various times such as after power-on or during operation through the use of self testing or in operations, which result in a unit state that is not expected or should not occur.

What is a BGW210-700?

The BGW210-700 Broadband Gateway has an integrated Wi-Fi access point to which you can use to connect Wi-Fi devices. By default, the BGW210-700 Broadband Gateway is configured with a Wi-Fi network name (SSID) and is WPA-PSK/WPA2-PSK security enabled.

How many ports does a BGW210-700 have?

The BGW210-700 Broadband Gateway includes one RJ-14 port (labeled Phone 1 & 2) with the capacity to support two phone lines using a splitter or multi-jack adapter.

What temperature should a BGW210-700 be?

Position the device in an upright vertical position located where ambient temperatures remain within a range of 32°- 107°F (0°- 41.7°C). The BGW210-700 Broadband Gateway should not be used in locations exposed to outside heat radiation or where it is subject to trapping of its own heat. The product should have at least two inches of clearance on all sides except the bottom when properly installed and should not be placed inside tightly enclosed spaces unless proper ventilation is provided.

How to contact ARRIS by phone?

365-095-30882 Revision 4.0 2016 ARRIS Enterprises LLC. All Rights Reserved. BGW210-700 Broadband Gateway Release 1.0 Install and Operations Guide 30 Chapter 7: ARRIS Contacts Chapter 7 ARRIS Contacts Technical Services For technical support on ARRIS products you can contact us by phone or on the web. By Telephone The Technical Assistance Center can be reached at:

How to connect a BGW210-700 to a computer?

1. Connect one end of the Ethernet cable to one of the Ethernet ports on the BGW210-700 Broadband Gateway. 2. Connect the other end of the cable to the Ethernet port on the computer. 365-095-30882 Revision 4.0 2016 ARRIS Enterprises LLC. All Rights Reserved. BGW210-700 Broadband Gateway Release 1.0 Install and Operations Guide 11 Connecting a Computer to a Ethernet Port of the BGW210-700 Broadband Gateway Chapter 3: Hardware Gateway Installation After the gateway recognizes the computer, the Ethernet light turns steady green and blinks when the computer starts transferring data with the gateway. See Status Indicator Lights

How many Gigabit Ethernet ports are there?

speed data over broadband networks via high-speed Internet connectivity. The four Gigabit Ethernet ports can be separated into different services allowing the configuration of dedicated ports for data. It is designed for advanced DSL network service deployments and supports Quality of Service (QoS) enabled features including:

What is the ringer equivalence number?

[US:AAAEQ##TXXXX] (Indicated on the label) The Ringer Equivalence Number (REN) is used to determine how many devices can be connected to your telephone line. In most areas, the sum of the REN's of all devices on any one line should not exceed five (5.0). If too many devices are attached, they may not ring properly. FCC Caution Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Radiation Exposure Statement This equipment complies with FCC radiation exposure limits as set forth for an uncontrolled environment. This equipment should be installed and operated maintaining a minimum distance of 22 cm (9 inches) between the device and your body. 365-095-30882 Revision 4.0 2016 ARRIS Enterprises LLC. All Rights Reserved. BGW210-700 Broadband Gateway Release 1.0 Install and Operations Guide 29 Service Requirements Chapter 6: Important Safety Instructions In the event of equipment malfunction, if under warranty, we will exchange a product deemed defective. Under FCC rules, no customer is authorized to repair this equipment. This restriction applies regardless of whether the equipment is in or out of warranty. Technical Support for Hardware Products:

How to reset a BGW210-700?

Press the factory reset button for less than ten seconds to reboot the BGW210-700 Broadband Gateway, the indicator lights on the device will respond immediately and start blinking red within one second of the reset button being pressed. The lights will blink whether the button is still being pressed or has been released. The indicator lights will flash for a minimum of five seconds, even if the reset button is released within five seconds of being pressed. If the reset button is held for more than five seconds, it will continue to blink until released or until ten seconds have elapsed

How long is a short term exhibit confidential?

The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of 180 days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify FCC in the event information regarding the product or the product is made available to the public. FCC will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. The applicant understands that until such time that Industry Canada distinguishes between Short Term and Permanent Confidentiality, either type of marked exhibit above will simply be marked Confidential when submitted to IC. Sincerely, Mark Rieger Principal Hardware Engineer Regulatory compliance and conformance ARRIS 310 Providence Mine Road, Ste. 200, Nevada City, CA 95959 USA o: +1 530-274-5440 c: +1 530-575-6010 e: mark.rieger@arris.com

Why are exhibits listed above permanently confidential?

The applicant requests the exhibits listed above as permanently confidential is permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality: