Remote-access Guide

aruba remote access point vs vpn

by Prof. Justyn Kovacek V Published 1 year ago Updated 1 year ago
image

Aruba Remote Access Points is rated 7.6, while Microsoft Azure VPN

Virtual private network

A virtual private network extends a private network across a public network, and enables users to send and receive data across shared or public networks as if their computing devices were directly connected to the private network. Applications running on a computing device, e.g. …

Gateway is rated 8.2. The top reviewer of Aruba Remote Access Points writes "Simple to scale, but complicated payment structure ". On the other hand, the top reviewer of Microsoft Azure VPN Gateway writes "User-friendly, easy to deploy, and very stable".

Full Answer

Does Aruba have a VPN service?

Aruba VPN Services. Simple to use VPN services make it easy for employees to securely connect to corporate resources from anywhere. Aruba’s Remote Access Points (RAPs) and Virtual Intranet Access (VIA) client offer a seamless experience from home, the small office or on-the-go.

Why choose Aruba for remote access?

Using Aruba’s remote access points, one user or thousands can easily connect all of their approved devices to the corporate Wi-Fi network – all over a persistent VPN for secure access from anywhere – at home, in a hotel or customer location.

When should I deploy an IPSec VPN tunnel in Aruba?

(Aruba recommends this deployment when AP-to-controllercommunications on a private network need to be secured.) In this scenario, the remote AP uses the controller’s IP address on the private network to establish the IPSec VPN tunnel.

What types of Aruba Wi-Fi APs are available?

Aruba Wi-Fi 5 and Wi-Fi 6 APs include enterprise, branch, plug-and-play for remote workers, outdoor, and hardened versions for a wide-range of use cases and price points.

What is remote access point service?

What is remote AP?

What port does a NAT use?

What happens if an AP is retired from active usage?

How does a remote AP work?

Can you use a local DHCP server to obtain IP addresses?

Where is the reboot button on AP?

See more

About this website

image

What is Aruba Remote Access Point?

Aruba Remote Access Points (RAPs) provide secure always-on network access to corporate enterprise resources from remote locations.

What is the differences between remote access and site-to-site VPN?

A remote access VPN connects remote users from any location to a corporate network. A site-to-site VPN, meanwhile, connects individual networks to each other.

Is an Aruba device a VPN?

Maintaining persistent VPN connectivity with full tunneling capabilities, Aruba RAPs provide secure routing of personal and work traffic to maintain privacy and compliance. Centrally managed by a VPNC ensures needed compliance changes happen instantly.

How does Aruba VPN Work?

The Virtual Intranet Access (VIA) client from Aruba provides secure remote network connectivity for Android, Apple iOS, Mac OS X, Linux and Windows devices. A hybrid IPsec/SSL VPN, VIA automatically scans and selects the best secure connection to the corporate network.

Does remote access VPN use IPSec?

While Remote access VPN supports SSL and IPsec technology.

What are the different types of VPN?

Here are five common VPN protocols and their primary benefits. PPTP. Point-to-Point Tunneling Protocol is one of the oldest VPN protocols in existence. ... L2TP/IPSec. Layer 2 Tunnel Protocol is a replacement of the PPTP VPN protocol. ... OpenVPN. ... SSTP. ... IKEv2.

How do I setup a VPN in Aruba?

4. Navigate to the Configuration >Security >Authentication > L3 Authentication page. a. Select default VPN Authentication Profile....Navigate to Configuration>Advanced Services > VPN Services and click the IPsectab.To enable L2TP, select Enable L2TP (this is enabled by default).Select the authentication method.More items...

How do I use Aruba access point?

Connect the power cable to the power supply.Connect the power cable to the Aruba AP and plug the power into power.Connect the provided network cable to the black E0/PT connection on the bottom of the Aruba AP. ... Connect the other end of the network cable into an open port on your wireless router.More items...•

How do I setup my Aruba wireless access point?

0:362:26Aruba: How to set up your remote access point - YouTubeYouTubeStart of suggested clipEnd of suggested clipFirst find your plastic desktop mount and snap it onto your wrap. So it can stand on its own like.MoreFirst find your plastic desktop mount and snap it onto your wrap. So it can stand on its own like. This next find an Ethernet port on your wrap labeled e0.

Can Aruba connect to WIFI?

The Aruba Instant On Solution requires you to connect Aruba Instant On APs to your wired network that provides internet connectivity. 1. Private Network Mode—Power on the Aruba Instant On AP using the power adapter or using a Power over Ethernet (PoE) port on a PoE capable switch.

Does Nord VPN work in Aruba?

BEST VPN FOR ARUBA:NordVPN is our first choice for Aruba. It's extremely fast, security-conscious, and capable of unblocking all manner of content abroad. All plans include a 30-day money-back guarantee, meaning you can try this VPN risk-free.

What is a VPN controller?

The AWS VPN Controller allows you to create and delete AWS VPNs and connect them to your VPCs using Kubernetes Custom Resource Definitions.

What is a VPN controller?

The AWS VPN Controller allows you to create and delete AWS VPNs and connect them to your VPCs using Kubernetes Custom Resource Definitions.

What is the function of a site-to-site VPN?

A site-to-site Virtual Private Network (VPN) provides this by creating an encrypted link between VPN gateways located at each of these sites. A site-to-site VPN tunnel encrypts traffic at one end and sends it to the other site over the public Internet where it is decrypted and routed on to its destination.

What is Aruba RAP?

The multifunctional Aruba RAP-3 delivers secure 802.11n wireless and wired network access to corporate resources from branch and home offices. Centrally managed by Aruba Mobility Controllers, the RAP-3 extends corporate resources to remote locations by establishing site-to-site VPN tunnels to the data center.

Configuring PSK Remote AP - Aruba

Configuring PSK Remote AP. You can use PSK Pre-shared key. A unique shared secret that was previously shared between two parties by using a secure channel. This is used with WPA security, which requires the owner of a network to provide a passphrase to users for network access.

ArubaOS 8 - Setting up Remote Access Point (RAP) | Wireless Access

ArubaOS 8 - Setting up Remote Access Point (RAP) The post shows the step by step configuration in setting up a Remote AP (RAP) in ArubaOS-8 (AOS8) on a standalo

reboot AP | Wireless Access

Access network design for branch, remote, outdoor and campus locations with Aruba access points, and mobility controllers.

What is remote access point service?

AP control and 802.11 data traffic are carried through this tunnel. Secure Remote Access Point Service extends the corporate office to the remote site. Remote users can use the same features as corporate office users. For example, voice over IP (VoIP) applications can be extended to remote sites while the servers and the PBX remain secure in the corporate office.

What is remote AP?

The remote AP requires an IP address to which it can connect in order to establish a VPN tunnel to the controller. This can be either a routable IP address that you configure on the controller, or the address of an external router or firewall that forwards traffic to the controller.

What port does a NAT use?

Communication between the AP and secure controlleruses the UDP 4500 port. When both the controllerand the AP are behind NAT devices, configure the AP to use the NAT device’s public address as its master address. On the NAT device, you must enable NAT-T (UDP port 4500 only) and forward all packets to the public address of the NAT device on UDP port 4500 to the controllerto ensure that the remote AP boots successfully.

What happens if an AP is retired from active usage?

In some cases, if an AP in the whitelist is retired from active usage, you can set the AP as revoked. This option restricts the AP from connecting to your controller. To revoke a remote AP:

How does a remote AP work?

Using DNS, the remote AP receives multiple IP addresses in response to a host name lookup. Known as the backup controllerlist, remote APs go through this list to associate with a controller. If the primary controlleris unavailable or does not respond, the remote AP continues through the list until it finds an available controller. This provides redundancy and failover protection.

Can you use a local DHCP server to obtain IP addresses?

If you use a local DHCP server to obtain IP addresses, you must define one additional ACL to permit traffic between clients without source NATing the traffic. Add user alias internal-network any permit before any any any route src-nat.

Where is the reboot button on AP?

You can also use the Reboot AP Now button at the bottom of the Diagnostic window reboots the remote AP.

What is Wi-Fi 5 in Aruba?

Aruba Wi-Fi 5 and Wi-Fi 6 APs include enterprise, branch, plug-and-play for remote workers, outdoor, and hardened versions for a wide-range of use cases and price points.

What is the difference between WPA3 and PEF?

WPA3 and Enhanced Open improve user and guest encryption, while PEF uses role-based access control and DPI to isolate and segment traffic. Aruba ESP enables Zero Trust Network Security for devices and IoT.

Can you work from home in Aruba?

Work from home or set up a temporary site with a solution that’s easy to deploy and manage. Aruba access points are automatically configured, so employees just plug them into any existing Internet connection and they’re ready to go.

What is remote access point service?

AP control and 802.11 data traffic are carried through this tunnel. Secure Remote Access Point Service extends the corporate office to the remote site. Remote users can use the same features as corporate office users. For example, voice over IP (VoIP) applications can be extended to remote sites while the servers and the PBX remain secure in the corporate office.

What is remote AP?

The remote AP requires an IP address to which it can connect in order to establish a VPN tunnel to the controller. This can be either a routable IP address that you configure on the controller, or the address of an external router or firewall that forwards traffic to the controller.

What port does a NAT use?

Communication between the AP and secure controlleruses the UDP 4500 port. When both the controllerand the AP are behind NAT devices, configure the AP to use the NAT device’s public address as its master address. On the NAT device, you must enable NAT-T (UDP port 4500 only) and forward all packets to the public address of the NAT device on UDP port 4500 to the controllerto ensure that the remote AP boots successfully.

What happens if an AP is retired from active usage?

In some cases, if an AP in the whitelist is retired from active usage, you can set the AP as revoked. This option restricts the AP from connecting to your controller. To revoke a remote AP:

How does a remote AP work?

Using DNS, the remote AP receives multiple IP addresses in response to a host name lookup. Known as the backup controllerlist, remote APs go through this list to associate with a controller. If the primary controlleris unavailable or does not respond, the remote AP continues through the list until it finds an available controller. This provides redundancy and failover protection.

Can you use a local DHCP server to obtain IP addresses?

If you use a local DHCP server to obtain IP addresses, you must define one additional ACL to permit traffic between clients without source NATing the traffic. Add user alias internal-network any permit before any any any route src-nat.

Where is the reboot button on AP?

You can also use the Reboot AP Now button at the bottom of the Diagnostic window reboots the remote AP.

image
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9