aruba rap 3wn remote access point

What is the Aruba rap-3?

The multifunctional Aruba RAP-3 delivers secure 802.11n wireless and wired network access to corporate resources from branch and home offices. Centrally managed by Aruba Mobility Controllers, the RAP-3 extends corporate resources to remote locations by establishing site-to-site VPN tunnels to the data center.

Can the rap-3 be used as a remote AP?

RAP-3 will operate as a Virtual Controlle r (VC) or an Instant AP. However, the RAP-3 can be converte d to oper ate as a Remote AP (RAP). For information about the IAP to RAP conversion, see RAP Conversion. connectivity. power to any compliant 802.3af powered device (class 0-4). The RAP-3 power adapt er (included) conn ects to the DC IN po rt.

Does the rap-3 have a USB port?

The RAP-3 is equipped with a USB port to support cellular m odems. The RAP-3WN has five LED indicators that di splay the status of the device.

Does the rap-3 have a POE port?

It is also available with an 802.3af power-over-Ethernet (PoE) port (RAP-3WNP model) for IP phones or other devices. At locations that require greater coverage, the RAP-3 can join an Aruba Instant WLAN cluster. Simply install additional RAP-3s or any Instant AP and the entire cluster is managed as one.

What is an Aruba remote Access Point?

Aruba Remote Access Points (RAPs) provide secure always-on network access to corporate enterprise resources from remote locations.

What is a rap Access Point?

The multifunctional Aruba RAP-3 delivers secure 802.11n wireless and wired network access to corporate resources from branch and home offices. Centrally managed by Aruba Mobility Controllers, the RAP-3 extends corporate resources to remote locations by establishing site-to-site VPN tunnels to the data center.

Is Aruba RAP in a router?

Aruba Networks RAP-5WN Wireless Router - IEEE 802.11n.

How does an Aruba RAP work?

Any Aruba access point can be provisioned to operate as a RAP. The purpose of deploying a RAP is to leverage the wireless and wired features of an Aruba access point from a remote location across the Internet. The RAP is configured to use IPsec to connect to a Mobility Controller's public IP over UDP 4500 for NAT-T.

How do I setup a remote access point?

0:482:26Remote access point set-up demo - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd plug it in until you hear it click into place. Now you need to locate an empty Ethernet port onMoreAnd plug it in until you hear it click into place. Now you need to locate an empty Ethernet port on your home router or modem and plug in the other end of the ethernet cable.

How do I set up an access point in Aruba?

Connect the power cable to the power supply.Connect the power cable to the Aruba AP and plug the power into power.Connect the provided network cable to the black E0/PT connection on the bottom of the Aruba AP. ... Connect the other end of the network cable into an open port on your wireless router.More items...•

How do you set up rap?

Navigate to Configuration > AP Installation (under Wireless.) Select the required remote AP under the Provisioning tab and then click Provision. Select Yes for Remote AP and Certificate for Remote AP Authentication Method. Click Apply and Reboot to apply the configuration and reboot the AP as certificate RAP.

How can I start Aruba at home?

1:063:17Aruba Instant On Home - Setting Up Your Home Network - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd you are ready to start configuring your network. Type in your wireless. Network name and set aMoreAnd you are ready to start configuring your network. Type in your wireless. Network name and set a password. Set your country name your site. And click on activate. Site the network is now ready.

What is Aruba Activate?

Activate is a kick-start for your Aruba Instant deployment. Activate enables a network installer to simply plug a new Instant Access Point into an internet connection anywhere in the world, plug in power (or PoE), wait for the AP's radio LEDs to light up and move on to the next location!

How do I connect to my Aruba RAP device?

0:332:26Aruba: How to set up your remote access point - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo it can stand on its own like. This next find an Ethernet port on your wrap labeled e0. Take oneMoreSo it can stand on its own like. This next find an Ethernet port on your wrap labeled e0. Take one end of your Ethernet cable and plug it in until you hear it click into place.

Can Aruba connect to WIFI?

The Aruba Instant On Solution requires you to connect Aruba Instant On APs to your wired network that provides internet connectivity. 1. Private Network Mode—Power on the Aruba Instant On AP using the power adapter or using a Power over Ethernet (PoE) port on a PoE capable switch.

How do I change my IP address on my Aruba access point?

To change the IP address of IAP:In the Access Points tab, click the IAP to modify. The edit link is displayed.Click the edit link. The edit window for modifying IAP details is displayed. ... Select either the Get IP address from DHCP server or Specify statically option.

How to connect a Rap 3?

To complete the installation of the RAP-3: 1. Connect one end of the provided RJ-45 cable to port E0 on the RAP-3. 2. Connect the other end of the RJ-45 cabl e to a free RJ-45 port on your modem.

Is a Rap 3 a VC?

RAP-3 will operate as a Virtual Controlle r (VC) or an Instant AP. However, the. RAP-3 can be converte d to oper ate as a Remote AP (RAP). For information. about the IAP to RAP conversion, see RAP Conversion.  Wireless transceiver.  Protocol-independent networking functionality.

Special offers and product promotions

Amazon Business: Make the most of your Amazon Business account with exclusive tools and savings. Login now

Important information

Statements regarding dietary supplements have not been evaluated by the FDA and are not intended to diagnose, treat, cure, or prevent any disease or health condition.